On this page
What is cloud accounting software?
Cloud accounting software is an accounting system you use from the browser instead of one computer in the office, so the accountant, the owner and the other branch all see the same data. It records every financial event by double entry, two equal sides debit and credit, and produces the financial statements from them.
It goes by many names: “accounting software”, “accounting system for companies”, “cloud accounting”. They mean one thing, books you can build reports on. In Anzma it is seven modules rather than a single closed program, bought together, with the ones your business needs switched on.
The difference from a traditional desktop package is that accounting here is not an island. Sales, purchases, stock, POS and payroll run on the same platform and post to the ledger on their own, so nobody carries figures across at month end. If you are looking for a system that runs the whole company, see business management software or read the guide to choosing an ERP system.
Is it suitable for small and mid-size companies?
Yes, they are the segment it was designed for. A company of five people does not need seven modules on day one, and the platform does not force them. Start with the ledger, treasury, expenses and reports, which are enough to know your cash, your month’s profit and your tax. As the business grows you add cheques if you sell on credit, assets if you buy vehicles and equipment, and cost centres once you open a branch or a second project.
The advantage is that adding a module does not mean migrating data to a new program, because the new module reads and writes the same ledger. Accounting grows with the company instead of being replaced by it. And the software does not replace an accountant: it controls recording, balance and reporting, while accounting and tax judgement stays with a qualified person.
What does the accounting line include?
The line has seven modules, each with a defined job, feeding one another. General ledger software is the book itself: the chart of accounts, entries, opening balances and period locks. Every other module either feeds this ledger or reads from it.
Cash and bank management software runs cash boxes, bank accounts, receipt and payment vouchers and bank reconciliation. Cheque management software tracks incoming and outgoing cheques from receipt to clearance or bounce. Expense management software classifies expenses, approves them and prepares recurring ones.
On the analysis side, fixed asset management software registers assets, calculates depreciation and verifies them, cost center accounting software spreads revenue and expense across branches and projects, and financial reporting software gathers it all into ready reports. The table shows who feeds whom.
| Module | Feeds the ledger with | Reads from it |
|---|---|---|
| Ledger and chart of accounts | Manual, opening and closing entries | Balances and periods |
| Treasury and banks | Receipt and payment vouchers and transfers | Bank reconciliation |
| Cheques | Deposit, clearance and bounce entries | Notes receivable and payable accounts |
| Expenses | The entry of each approved expense | Account classifications |
| Fixed assets | Monthly depreciation and disposal entries | Asset accounts |
| Cost centres | Centre tags on lines | Each centre’s profitability |
| Financial statements | Nothing | All balances and movements |
How is the chart of accounts built for my company?
Every Anzma company starts with a ready chart of accounts rather than an empty screen. When the company is created the system picks the country pack (Egypt, Saudi Arabia, or the Gulf pack for other countries), then an activity profile: trading, services or manufacturing, taken from the business template you chose. A retail shop gets a trading chart, a consultancy a services chart, and a factory a manufacturing chart with raw materials, work in progress and finished goods.
The chart stays yours afterwards: you add, move and deactivate accounts, import a chart your accountant prepared from a ready file, and print or export it. Inventory accounts are locked against manual entry, so their balance moves only through stock movements, which keeps the books from drifting away from the physical count. The tree and its levels are explained on the general ledger software page.
Why does this matter when choosing software? Because the work that eats migration time is building the chart and linking it to documents. When the chart arrives ready, with sales, purchases, tax and treasury accounts already mapped, your job shifts from building to reviewing and adjusting.
How do entries post automatically from each transaction?
Every financial document in Anzma passes through one posting service that checks balance and the open period and writes the entry. The accountant does not work in the ledger all day but with the documents the company’s teams already know: an invoice, a voucher, an expense, a payslip. The entry is created on its own and linked to its document, so the document opens from the entry.
Posting covers more than invoices: POS sales, payslips with their expense and payables, treasury vouchers, depreciation entries and cheque movements. When a posted document is cancelled its entry is not deleted but reversed by an opposite entry, so the effect stays visible in the ledger’s record.
The table gives examples of the accounting effect of the main documents. These are simplified summaries; the actual accounts are those in your chart and in the module’s account mapping.
- 1
A document is issued
An invoice, voucher, expense or payslip in its usual module, without opening an accounting screen.
- 2
The system checks
It confirms both sides balance, the period is open and the required accounts and centres exist.
- 3
The entry posts
It enters the ledger with a number, date and source document, and shows in reports immediately.
| Document | Debited | Credited |
|---|---|---|
| Credit sales invoice | Customers, and cost of sales | Sales, VAT and inventory |
| Purchase bill | Inventory or expense and input VAT | Suppliers |
| Customer receipt voucher | Cash or bank | Customers |
| Cash expense | The expense account and its VAT | Cash or bank |
| Monthly depreciation | Depreciation expense | Accumulated depreciation |
| Incoming cheque deposited | Cheques under collection | Notes receivable |
What does the same entry look like in Egypt and Saudi Arabia?
An illustrative example puts both countries on one invoice: you sell goods at 10,000 before tax, and they cost you 6,000. The accounting structure is the same; what changes is the VAT rate and therefore the total owed by the customer. In Egypt the default rate is 14%, in Saudi Arabia 15%.
The table shows the entry lines in both cases. Notice that sales and cost of sales do not change, and that VAT goes to a dedicated account, which the VAT report reads later. The numbers are illustrative and not tax advice; ask your accountant about the tax treatment of your items.
| Line | Egypt (14%) | Saudi Arabia (15%) |
|---|---|---|
| Customers (debit) | 11,400 | 11,500 |
| Sales (credit) | 10,000 | 10,000 |
| VAT (credit) | 1,400 | 1,500 |
| Cost of sales (debit) | 6,000 | 6,000 |
| Inventory (credit) | 6,000 | 6,000 |
How does accounting differ between Egypt and Saudi Arabia inside the system?
The accounting structure is the same in both countries; what surrounds it differs: tax authority, electronic document and currency. When a company is created Anzma applies its country pack: a chart of accounts, a default VAT rate, the tax number format and the e-invoicing system that is switched on. This is the side-by-side view you rarely find gathered on one page elsewhere.
The table describes what Anzma does in each country; it is not a statement of what your business is legally required to do, which only the official authority decides. Rates and dates change, so always check with the Egyptian Tax Authority and the Zakat, Tax and Customs Authority.
| Aspect | Egypt | Saudi Arabia |
|---|---|---|
| Tax authority | Egyptian Tax Authority | Zakat, Tax and Customs Authority |
| Books currency | Egyptian pound | Saudi riyal |
| Default VAT | 14% (and zero) | 15% (and zero) |
| Tax number | Nine digits | Fifteen digits |
| Electronic document | E-invoice, plus e-receipt for POS | Fatoora phase 2: tax and simplified |
| Signing | Establishment certificate (often USB) and a signing agent | Key and CSID certificate per billing unit |
| Statutory chart accounts | Payroll tax, business profit tax, social insurance | Zakat and social insurance |
Is it compatible with e-invoicing in Egypt and Saudi Arabia?
Yes, in the sense of integration, not approval: Anzma’s modules are compatible with and connected to the Egyptian Tax Authority’s system and the Fatoora platform at the Zakat authority, and we do not claim that either has approved or listed Anzma. The invoice is issued from sales, posts to the ledger with its entry, is sent to the authority as a signed document, and its status is tracked until accepted or rejected.
It works at company level: an Egyptian company gets the Egyptian system and a Saudi company gets Fatoora, so you are not shown an option that does not apply to your country. That avoids a common mistake, running two programs, one for the books and another for government invoicing.
For the accountant it means the invoice seen in the ledger is the very one that was sent, with no reconciliation between a bookkeeping program and a separate invoicing one. Integration details, from the signing certificate in Egypt to billing units in Saudi Arabia, are on the e-invoicing software page, with the modules ETA e-invoice integration and ZATCA e-invoicing software.
- The invoice sent is the same one posted in the ledger.
- A test environment for each system before the first live send.
- We do not register your establishment with the authority; that step is yours.
How do I prepare the VAT return?
The accountant does not collect invoices by hand at month end. Each line carrying tax holds its rate and base in the ledger, so the VAT report extracts output tax from sales, input tax from purchases and expenses, and the net due for the period. The report follows the country’s return layout: the Egyptian style (taxable, exempt, zero-rated) or the Saudi style (basic rate, zero-rated and exempt, with purchases and adjustments).
The breakdown by rate ties to the tax ledger accounts, so you can reconcile the VAT account balance with the report total, which is exactly what an auditor asks for. Filing the return itself happens with the official authority, not inside the software, so the report is a tool for preparation and review.
Expenses record their VAT inclusive or exclusive, and input tax appears for expenses that have a supplier with a tax invoice. Rates and forms can change, so check with the authority before adopting any classification.
What can an accountant audit inside the software?
The software gives the accountant what a review demands: who recorded what, when and why. A posted entry is never edited but reversed by a linked opposite entry, so both the original and the correction stay on record. Monthly periods can be locked so no entry is accepted inside them without the override permission, and the year closes with one closing entry that can be reversed if needed.
Opening balances come from one wizard as a single entry on the day before go-live, so customer and supplier statements are right from day one, and re-running the wizard reverses the previous entry rather than doubling the effect. Permissions separate who writes a draft from who posts it and who closes the period. The audit log records the creator and editor with dates, and with approval rules enabled, a manual entry can need sign-off before posting.
- Reverse an entry instead of editing it, so the trail is complete.
- Period locks, a general lock date and a separate override permission.
- Opening balances through a wizard, in one reviewable entry.
- Separate permissions to view, create, post, reverse and close.
- An audit log of creator and editor, with permissions per module.
What does a month-end close look like in practice?
Closing the month is not one event but a checklist that repeats. What the software changes is that each task is a screen or report inside the same platform, so you do not gather numbers from scattered files. The order below is a suggestion to adapt with your accountant to your business.
- 1
Check cash
Compare the bank statement with the ledger in bank reconciliation, and follow up cheques under collection and falling due.
- 2
Record what is missing
Approve pending expenses, post drafts and review the recurring expenses that were prepared.
- 3
Run depreciation
Preview the month’s depreciation for assets and approve it so it posts as one entry.
- 4
Check the trial balance
Confirm it balances and review unusual accounts and overdue ageing.
- 5
Prepare VAT
Extract the period report and review outputs and inputs before preparing the return.
- 6
Lock the period
Lock the month so its reports stay fixed and it accepts no new entry without the override permission.
Who does what? Permissions in the accounting team
Books are not trustworthy if everyone can do everything, so Anzma splits permissions by module and action: view, create, edit, delete, post, reverse and export, and each user gets what their role needs. An accounting assistant can write a draft entry without posting it, the senior accountant posts it, and only someone given the periods permission can lock a period.
The table is a suggested split of common roles. Companies differ, so adapt it to your structure, and remember that cheque and treasury permissions are separate from ledger permissions.
| Role | Usually does | Does not |
|---|---|---|
| Cashier | Receipt and payment vouchers on their own box | Post manual entries or lock periods |
| Accounting assistant | Draft entries and expenses | Post entries |
| Senior accountant | Post and reverse entries, bank reconciliation | Reopen a closed year |
| Finance manager | Approve and lock periods, reports | Record daily documents |
| External accounting firm | View and export books and reports | Edit or post |
How do I follow customer debts and supplier obligations?
A ledger that does not tell you who owes how much and since when is half useful. In Anzma each customer or supplier line in the control accounts is tied to the party, so each party’s statement appears with its movements and balance, and opens from the party’s own profile. Credit sales invoices become receivables, a receipt voucher, cheque or collection reduces them, and a collection is allocated to the oldest open invoices or to a chosen one.
The ageing report adds the time dimension: what is due but not late, what is a week late, what is over a month. The collector knows who to start with and the manager knows how much may not return. The same applies to suppliers: what you owe and when, so you schedule payments and are not surprised. See financial reporting software for more.
- A statement for each customer and supplier with movements and balance.
- Collections allocated to open invoices automatically or manually.
- Ageing by time bands for overdue balances.
- A bounced cheque reopens the invoice and the customer owes again.
Can I add approvals before posting?
Yes, and they are optional so a small company is not weighed down. With the workflows module on, a manual entry can need approval before posting, the monthly depreciation run needs a manager’s approval, and expenses above an amount you set need approval before they post. Documents reach the ledger having been seen by two people instead of one.
These approvals complete permissions rather than replace them. A permission says who can do an action, an approval says who must agree before it happens. Together with the audit log they give one trail: who created, who approved, who posted, and when.
Which financial reports come ready?
Every report is built from posted entries directly, so as soon as an entry posts its effect shows with no manual refresh. There are ten: trial balance, account statement and ledger, journal report, income statement, balance sheet, cash flow by the direct method, customer and supplier statements, ageing, VAT report and cost centre profit and loss.
The VAT report is laid out like the return of the company’s country, so you prepare and review your return from it. It is a preparation tool, not a submission to the authority. All reports export to Excel and PDF with the company letterhead, compare one period with another, and filter by branch and cost centre. Each report is explained on the financial reporting software page.
| Question | Report |
|---|---|
| Do the books balance? | Trial balance |
| Did we make a profit this month? | Income statement |
| What do we own and owe? | Balance sheet |
| Where did the cash go? | Cash flow |
| Who is late paying? | Ageing |
| How much VAT do we owe for the period? | VAT report |
| Which branch earns? | Cost centre profit and loss |
How are cash, cheques and expenses managed?
Cash is what an owner watches first. In treasury you define cash boxes, bank accounts and e-wallets, each with its own currency and balance, and record collections and payments with receipt and payment vouchers. Monthly, you compare the bank statement with the ledger in bank reconciliation, so you know which movements are not yet matched.
Cheques add a special layer, because a post-dated cheque is not cash. The module records an incoming cheque “in safe”, then “under collection” when deposited, then “cleared” or “bounced”, posts an entry at each step, and reminds you before it falls due. Outgoing cheques to suppliers have cheque books and printing on the bank’s leaf.
An example of the integration: you sell on a cheque dated three weeks ahead, so the customer’s balance falls and the cheque shows in notes receivable. You deposit it and it moves to “under collection”, the bank pays it and cash enters the bank account, and in reconciliation the accountant matches the movement to the bank statement. Nobody keys the figure twice or links the steps by hand.
Expenses are each classified to an account, paid from the treasury or recorded against a supplier, approved above a limit you set, and recurring ones are prepared as monthly drafts. Details on the pages for cash and bank management software, cheque management software and expense management software.
How do I know each branch’s and project’s profit, and my assets’ value?
Management needs more than the company’s total profit. Cost center accounting software adds a tag to entries and documents that spreads revenue and expense over branches, projects and departments, so a profit and loss comes out with a column per centre from the same ledger. You can require a centre on chosen accounts and link each branch to a default centre.
Fixed asset management software measures what you own: it registers assets by category and calculates depreciation by straight line, declining balance or units of production, then you preview the month and approve it so it posts as one entry carrying each asset’s centre. You verify assets by scanning each one’s QR label, and dispose of what is sold or scrapped with a gain or loss entry.
The two work together: depreciation of a project vehicle is charged to its centre, and the pay of its staff carries the centre too, so the project’s cost is complete from the ledger without manual collation.
Which accounting modules suit my business?
Not every company needs all seven from day one. The ledger, treasury, expenses and reports are the base for any business, and the rest are added when a reason appears. The table suggests a starting point by type of business; it is general guidance to adjust with your accountant.
| Business | Base | Usually added |
|---|---|---|
| Shop or store | Ledger, treasury, expenses | Financial reports |
| Wholesale and supply | Ledger, treasury, reports | Cheques and cost centres |
| Contracting | Ledger, expenses, reports | Cost centres, assets, cheques |
| Factory | Ledger, reports | Assets and cost centres |
| Service office | Ledger, expenses | Reports and cost centres |
How does the software handle foreign currencies?
The books are kept in the company’s base currency, the pound in Egypt and the riyal in Saudi Arabia by default. If you deal in another currency, entry lines carry the currency and its exchange rate, rates are stored in an exchange-rate table, and balances show in the book currency with the original amount beside them.
In treasury each bank account or cash box has its own currency, so you can keep a dollar account next to a local one. When transferring between two currencies you enter the rate or the amount received, and the system records the difference as an exchange gain or loss. Some reports can be shown in another currency for viewing only, without changing the ledger.
To be plain: revaluing foreign balances at period end is an accounting decision, and its treatment depends on your company policy and the standards in your country. Anzma provides the structured basis of currency, rate and account; the revaluation policy rests with your accountant.
What is the difference between Excel sheets and an accounting system?
Many small companies started with Excel, an excellent analysis tool but not a ledger. A sheet does not stop an unbalanced entry, does not lock a month, does not know who changed a cell, and does not post from an invoice. The file grows until it becomes a risk: a broken formula, an old copy sent out, a figure changed without a trace.
That does not mean abandoning Excel, since every report exports to it. The point is to keep the books in a system that controls balance, periods and audit, and keep your sheets for extra analysis. The table summarises the differences that appear at the first serious review.
| Aspect | Excel | Anzma |
|---|---|---|
| Entry balance | No check | An unbalanced entry cannot post |
| Period lock | Not available | Monthly lock and year close |
| Change tracking | None | Audit log of creator and date |
| Posting from invoices | Copy and paste | Automatic from each document |
| Tax report | Manual totals | From the tax lines in the ledger |
Cloud or desktop accounting software?
Desktop software installs on one office computer and its data stays there. Cloud software runs in the browser on a server the provider operates. Each has its place: desktop suits a small business with one computer and one person, while cloud suits a company with branches or an outside accountant, or one that wants accounting tied to sales and stock.
The table compares what usually matters when choosing. Each Anzma company has its own separate database, and the platform supports two-factor authentication, permissions and an audit log, but protecting your data remains a shared responsibility: strong passwords, sensible permissions and periodic review of users.
| Aspect | Desktop | Cloud (Anzma) |
|---|---|---|
| Access | The office computer only | Any device and place, by permission |
| Branches | Separate copies merged by hand | One set of data for all branches |
| Outside accountant | Files passed around | A user account with permissions |
| Updates | Installed by hand on each machine | Automatic on the platform |
| Link to sales and stock | Import and export | Automatic posting by entry |
| E-invoicing | Often a separate program | Tied to sales and the ledger |
What are the plans, and are accounting modules tied to a plan?
All seven accounting modules are available on every plan with no special restriction. The four plans, Basic, Advanced, Comprehensive and Enterprise, step up by usage: number of users, branches, warehouses, POS terminals and invoices per month. The financial statements, cheques and assets are not withheld from the lower plan.
What changes with the plan is what surrounds accounting: how many accountants work together, how many branches carry their own cash boxes and cost centres, and the volume of posted invoices. Some other capabilities, such as manufacturing, the API and a custom domain, are limited to Comprehensive and Enterprise and are not accounting modules.
We do not list prices on this page so they do not go stale; they are kept current on the pricing page. If you are unsure which plan fits the size of your company, that is one of the things we answer in the meeting.
Which businesses use accounting software?
Accounting software suits every business, but usage differs. Retail store management software relies mainly on treasury, expenses and the income statement, while wholesale management software adds post-dated cheques and ageing because credit selling is the norm there.
Contracting management software needs cost centres per project and assets of equipment that move between sites, and factory management software cares about depreciation of machines and the cost of each production line. For tender and supply management software the key items are incoming and outgoing cheques and cash flow.
An accounting firm management software user wants to work on tight books and deal with clients through clear permissions. Each of these businesses has a page explaining in detail what Anzma does for it.
What should I ask before choosing accounting software?
The market is full of programs that look alike on the surface and differ underneath. Before signing with any vendor, including us, ask to be shown rather than told: an entry created from an invoice, a period lock stopping an entry, an audit log naming the editor. A program that does this in front of you is more credible than any feature list.
Be careful with the phrase “approved by the tax authority”: check its source on the official authority’s own site, because integration and compatibility are not the same as official approval. These questions shorten your check.
- Does the entry come from the invoice automatically, or do I carry it over?
- Does it block an unbalanced entry and lock periods?
- Is a posted entry reversed rather than edited, and is who did it recorded?
- Does it support tax and e-invoicing for my country, and what do I need to sign?
- Can I export my data and reports whenever I want?
- What are the plan limits, and what changes if my company grows?
What are the limits of Anzma’s accounting software?
We prefer you learn the limits before agreeing, not after. The software does not file your tax return with the authority for you; it prepares the data. It does not register your establishment with the e-invoicing system, which is a step that is yours, and it does not supply the signing token in Egypt that the issuing body provides.
In the books: one document carries a single cost centre, so there is no automatic percentage allocation, and revaluing foreign balances at period end is an accounting decision you take, not an automatic entry. There is no native mobile app, though the system works in a phone browser. Our team tells you all of this plainly in the meeting rather than leaving you to find it after you sign.
How do I start, and how do I move from my current program?
Migration starts with choosing a go-live date, ideally the start of a month. You create the company and it takes its chart from the country and activity pack, and you can import a chart your accountant prepared from a file. Then enter opening balances through the wizard: account balances and customer and supplier balances individually, and match them to the trial balance in your old program.
Next switch on treasury, expenses and cheques as you need them, and train users by role. We do not promise one duration for migration, since it depends on the size and cleanliness of your data and the number of branches. What we promise is that the steps are set out with you in the meeting.
Set aside time for training, because most first-week problems come not from the software but from old habits: a document written outside the system, or an expense recorded without a centre. Name an owner for the ledger, assign permissions by role, and review the trial balance weekly during the first month until things settle.
Plans follow usage: number of users, branches, warehouses and monthly invoices, not the accounting modules, which are on every plan. See the pricing page, and to begin, book a free online meeting and we will show you the system on your own data.
- 1
Create the company
Choose the country and activity so the system builds the right chart of accounts and tax rate.
- 2
Enter opening balances
Use the wizard, one entry on the day before go-live, and match it to your old trial balance.
- 3
Switch on modules and start
Begin with treasury and expenses, and add cheques, assets and cost centres when you need them.
Frequently asked questions
What is the difference between accounting software and an ERP system?
Accounting software records financial transactions and produces statements. An ERP system runs the whole company: sales, stock, purchasing and HR as well as accounting. In Anzma accounting is part of the ERP, so every operation posts to the ledger on its own.
Is it compatible with e-invoicing in Egypt and Saudi Arabia?
Anzma’s modules are compatible with and connected to the Egyptian Tax Authority’s system and the Fatoora platform at the Zakat authority, without claiming approval by either. The invoice is issued from sales, posts to the ledger and is sent to the authority. Details are on the e-invoicing page.
Is it suitable for accountants and accounting firms?
Yes. It gives the accountant double entry, separate permissions, an audit log, period locks and reports with filters, and an outside firm can log in as a user with limited permissions instead of passing books around by email, exporting reports to Excel and PDF as needed.
Can I lock financial periods?
Yes. Monthly periods can be locked so no entry dated inside them is accepted without the override permission, and a general lock date can be set. The year closes with one entry that zeroes revenue and expenses against retained earnings, and can be reopened by reversing it.
How do I enter opening balances?
Through one wizard after you set the go-live date. It writes a single opening entry on the day before go-live, containing account balances and each customer and supplier balance. If you find a mistake, re-run the wizard and it reverses the previous entry and posts the new one.
Does it support cost centres and fixed assets?
Yes, in two separate modules. Cost centres spread revenue and expense over branches and projects and give a profit and loss for each. Fixed assets registers assets, calculates depreciation by three methods, verifies them and disposes of them with a gain or loss entry.
Does it manage post-dated cheques?
Yes, in the cheques module: incoming and outgoing cheques with statuses from receipt to clearance or bounce, an entry for each move, a due-date calendar, reminders before the date, and printing outgoing cheques on a bank layout. A bounced cheque reopens the invoice.
Is cloud accounting software secure?
Each Anzma company has its own separate database, and users have fine permissions, two-factor authentication and an audit log to trace changes. Security is still shared: strong passwords, sensible permissions and periodic review of who has access are part of your side.
Is there free accounting software?
We do not offer a free version. Accounting is part of a paid platform whose plans scale with users, branches and invoices. You can book a free online meeting where we show the system on your own data and explain the plan that fits your company’s size.
How long does it take to move from my current program?
There is no fixed duration, because it depends on how many accounts, customers and suppliers you have, the quality of the data and the number of branches. The steps are known: create the company and chart, enter opening balances in one entry, then train users. We estimate it with you.
Does it work in Arabic and English, and with several currencies?
Yes, the interface and reports are in Arabic and English. The books stay in the company’s base currency; an entry carries a currency and exchange rate when you deal in others, and each treasury account has its own currency. Some reports can be viewed in another currency for reference only.
Official sources
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


