On this page
What is a cost center in accounting?
A cost centre is a tag added to a journal line to show where an amount was spent or earned: a branch, a project, a department or a season. Instead of the ledger showing rent as one company-wide figure, it shows rent spread across the parts of the business that used it.
In Anzma the tag is built into the accounting software itself, so every line in the general ledger accepts a centre. You learn which branch earns and which loses without a second book or double entry, because the profitability report reads the same ledger that builds the financial statements.
Names follow your business. In the farm template, for example, the centre is called a “season”, so each growing season is accounted for on its own.
What is the difference between a cost center and a profit center?
A cost centre carries expenses only, such as a maintenance department. A profit centre gathers revenue and expenses to measure its own profit, such as a branch. Theory separates them, but in Anzma they are one thing: a tag that accepts both revenue and expense.
If you tag a branch’s revenue and its expenses with the same centre, it behaves as a profit centre and its profit shows in the report. If you tag expenses only, it is a cost centre and shows a negative net. The decision is yours, not a separate setting.
How do I design cost centers for my business?
The rule is to make centres answer the question you ask every month. What does the owner hold you to account for? If it is the branch, make centres branches. If it is the project, make them projects. Avoid over-splitting; a centre for every line item turns the report into a maze.
The table gives illustrative trees by sector. Treat them as a starting point to adapt to your business.
| Activity | Main centres | What it answers |
|---|---|---|
| Multi-branch trading | Cairo branch, Riyadh branch, online store | Which branch is profitable |
| Contracting | Project A, Project B, equipment, administration | Each project’s cost against its revenue |
| Hospital or medical centre | Clinics, laboratory, radiology, pharmacy | Which department covers its cost |
| Factory | Line 1, Line 2, maintenance, quality | Each line’s cost and the share of maintenance |
| Hotel | Rooms, restaurant, event halls | Each activity’s revenue and cost |
Where is the cost center set on documents?
Every document that touches revenue or expense can carry a centre. In sales you set it on the whole invoice or on each line, and the same applies to purchase bills, returns and notes. Expenses, receipt and payment vouchers and supplier payments have a centre field. In a manual entry each line has its own.
It reaches into HR as well. An employee or their department is linked to a centre, so the payslip carries it when posted, and a fixed asset is linked to a centre so its depreciation entry carries it. A project’s cost comes together from purchases, payroll and depreciation without manual collation.
Documents that carry no centre, such as POS receipts, appear in the “no centre” column of the report, or take the branch’s default centre if you enable that.
- Sales and purchase documents and their returns, per document or per line.
- Expenses, receipt and payment vouchers and supplier payments.
- Payslips through the employee’s or department’s centre.
- Fixed asset depreciation through the asset’s centre.
How do I make sure nobody forgets the cost center?
Neglect is the main enemy of a cost centre report: a document with no centre leaves a gap in profitability. The module gives two tools. The first is accounts that require a centre. You mark an account such as “maintenance expense” as needing one, and the system refuses to post an entry on it without a centre and tells the user why.
The second is a default centre per branch. You link each branch to its centre in settings, and revenue and expense lines with no centre chosen take the centre of the document’s branch. This helps multi-branch companies, because the cashier and accountant need not pick a centre every time.
How do I read the cost center profit and loss report?
The report follows the income statement but with a column per cost centre, one for items with no centre, and a total: revenue, cost of sales, gross profit, operating expenses and net profit. You filter by period, branches and chosen centres, and export to Excel or PDF.
An illustrative company with two branches: the Cairo branch earns 500,000 against 380,000 of direct expenses, a profit of 120,000. The Riyadh branch earns 300,000 against 330,000, a loss of 30,000. Administration expenses of 40,000 carry no centre. The company nets 50,000, but the report tells you one branch is losing.
| Item | Cairo branch | Riyadh branch | No centre | Total |
|---|---|---|---|---|
| Revenue | 500,000 | 300,000 | 0 | 800,000 |
| Direct expenses | 380,000 | 330,000 | 0 | 710,000 |
| Administration | 0 | 0 | 40,000 | 40,000 |
| Net profit | 120,000 | (30,000) | (40,000) | 50,000 |
How do I split an expense across several cost centers?
A document carries one centre, so a rent shared by two branches is not split automatically by percentage. To split it you write a manual entry with one line per centre for its share, or record the expense twice with two amounts, which is common for rent and electricity.
On purchase and sales invoices you can spread the items over different centres, because the centre is set per line. Buying materials for two projects on one bill, you tag each line with its project.
- Manual entry: one line per centre for its share.
- Invoice: tag each line with its centre.
- No automatic percentage allocation in this version.
Example: how do I charge a shared rent to two branches?
Suppose a shared monthly rent of 20,000 that you want to charge to two centers in a ratio you estimate (an illustrative example). The system does not split by percentage automatically, so you write the entry yourself with two lines:
After posting, the rent appears in the profit and loss report as a column per branch with its share, so you read each branch’s profitability after bearing its portion. It is better for the accountant, not the cash custodian, to write the entry, and to repeat it on the same basis every month so comparisons between months stay fair. See the cost center profit report for details.
| Account | Cost center | Debit | Credit |
|---|---|---|---|
| Rent | Cairo branch | 12,000 | |
| Rent | Alexandria branch | 8,000 | |
| Cash or supplier | No center | 20,000 |
How are cost centers used in trading companies?
In a trading company centres usually follow branches, and sometimes sales channels such as showroom, wholesale and online store. You see each branch’s revenue and its direct expenses, such as rent, salaries and electricity, and set them against the cost of its goods.
The default centre per branch helps here: cashier sales and a branch’s invoices go to its centre automatically without the employee thinking about it. Head-office expenses sit on an “Administration” centre, and management then decides whether to spread them over branches in its own analysis or leave them separate so branch profitability shows before shared overhead.
This suits wholesale management software and multi-branch retail store management software, where the key question is which branch deserves to grow and which needs review.
How are cost centers used in contracting companies?
In contracting the project is the unit of profit. The accountant creates a centre for each project and tags material bills, subcontractor invoices, payment vouchers and site payroll with it. The project’s actual cost shows up as you go, and you compare it with what you have billed the client.
You add a centre for shared equipment and one for general administration, and charge their cost to projects with a manual entry at month end if you wish. The practical gain is that a losing project is visible mid-way, so you decide before the overrun grows.
The contracting management software template has an onboarding step that asks you to define cost centres before recording your first project.
How are cost centers used in hospitals and factories?
In a hospital or medical centre, centres split into revenue-earning departments such as clinics, laboratory, radiology and pharmacy, and support departments such as administration and maintenance. Doctors’ and technicians’ pay is tagged to their department and consultation and test revenue to the department that delivered it, so you see which department covers its cost. This suits clinic management software with several departments.
In a factory you create centres for production lines and for services such as maintenance and quality. Materials, labour and depreciation are charged to the line that consumed them, and you learn each line’s cost and margin. It ties in with assets: depreciation of line one’s machine goes to its centre automatically.
What mistakes are common when designing cost centers?
Three mistakes are most common. The first is over-splitting: dozens of fine centres leave each with trivial activity that means nothing and tires staff at entry. The second is changing meaning mid-year: when a centre that was a branch becomes a project, month-to-month comparison loses its value, so open a new centre instead of changing the old one. The third is leaving “no centre” large and unmonitored.
A simple discipline avoids all three: design the tree with your finance manager around the questions management really asks, review the “no centre” column monthly, and deactivate finished centres instead of deleting them.
Why do I need cost centers if I already have branches?
A branch in Anzma is a separate dimension: documents and entries are linked to it, and reports can be filtered by it. A cost centre is an extra analytical dimension that is not tied to a place. One branch may hold two projects, one project may span two branches, and a company may be divided into departments unrelated to branches.
That is why both dimensions meet in one report: filter centre profitability by branch or branch profitability by centre, and answer questions like “what did Project A earn in the Riyadh branch alone?”. If you do not need that complexity, give each branch a default centre and stop there, and you get branch profitability with no extra effort.
Cost centres remain optional, and not every company needs them. If your business is one branch with one service, the ordinary income statement may be enough, and you add centres when you need to compare parts of the business.
Who benefits from cost centers?
Any company that wants profit more precise than the company total. Contracting management software needs each project’s cost, factory management software measures production lines, hotel management software splits revenue between rooms, restaurant and halls, school management software accounts for its stages, and farm management software follows its seasons.
The module connects to expense management, where each expense carries a centre, and to fixed asset management software, which charges depreciation to a centre. It is all part of one accounting software line.
If you would like to design the centre tree with our team before recording the first invoice, book a free online meeting and we will build it around your business.
How do I start using cost centers?
Start with a management decision before any setup: which parts of the business do you want to measure? Then build the tree from the cost centres screen with a code and name for each, and link each branch to its centre. After that, mark the accounts that must never be posted without a centre, and update recurring expense templates to carry theirs.
At the end of the first month open the profitability report and look at the “no centre” column. If it is large, documents are slipping through untagged, so tighten the rule by requiring a centre on one more account. You can deactivate a centre whose project has ended instead of deleting it, so its history stays in reports. A centre with activity or children cannot be deleted.
- 1
Design the tree
Decide which branches, projects or departments to measure and create centres with codes.
- 2
Set the rules
Link branches to their centres and mark the accounts that require one.
- 3
Record and review
Tag documents as you work, review the report monthly and shrink the “no centre” column.
Frequently asked questions
What are cost centers?
Tags added to entries and documents to spread revenue and expenses across branches, projects or departments. With them you see each part’s profit and cost instead of one company-wide figure, without keeping a separate book for each.
What is the difference between a cost center and a profit center?
A cost centre carries expenses only, like a maintenance department; a profit centre gathers revenue and expenses to measure profit, like a branch. In Anzma it is one tag: tag both revenue and expense to the same centre and it works as a profit centre.
How do I split an expense across more than one cost center?
A document carries one centre, so split a shared expense with a manual entry that has one line per centre, or record it twice. Purchase and sales invoices set the centre per line, so their items can go to different centres. There is no automatic percentage split.
What are examples of cost centers in contracting?
Each project is its own centre, with extra centres for shared equipment, administration and the warehouse. Tagging purchases, payroll and depreciation to the project centre gives its full cost to compare with its revenue and progress billings, so a losing project shows early.
What are examples of cost centers in hospitals and medical centers?
They usually split into operating departments such as clinics, laboratory, radiology and pharmacy, and support departments such as administration and maintenance. Each carries its revenue, expenses and staff payroll, so you see which department covers its cost and which needs review.
How do I read the profit and loss of a cost center?
Open the cost centre profit and loss report and choose the period. You get a column per centre with revenue, cost of sales, expenses and net profit, plus a column for items with no centre and a total. Check the “no centre” column first; it measures how complete the tagging is.
Can I force users to choose a cost center?
Yes, at account level. Mark an account in the chart as requiring a centre and the system refuses to post any entry on it without one. You can also link each branch to a default centre that revenue and expense lines take automatically.
Can I delete a cost center?
You can delete a centre that has no activity, no children and no expenses or vouchers. If it has been used, deactivate it instead of deleting it, so it stays in reports for past periods and drops out of the lists used for new entries.
Can one expense be split across several centers by percentage?
Not automatically. A document or a line carries one cost center. To split a shared expense, write a manual entry with a line per center for its share, or spread an invoice’s lines across centers, since the center is set at line level.
Part of the product line
accounting software
Double entry that posts itself from sales, purchases, treasury and payroll, financial statements and a VAT report, and seven modules covering the ledger, cash, cheques, assets and cost.
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


