On this page
What is the cheque cycle?
The cheque cycle is a cheque’s journey from the moment you receive it from a customer or issue it to a supplier until it clears or bounces, including deposit, postponement and endorsement along the way. In Anzma this journey runs in one module inside a complete accounting software line, and every step updates the cheque’s status and posts its entry to the ledger.
The cycle matters because a post-dated cheque is neither cash nor an ordinary debt. It is a commercial paper in between: the customer has paid on paper, but the money has not reached the bank. Record it as cash and you overstate liquidity; leave it as a customer debt and you forget it is in your hand. Accounting therefore tracks it in dedicated accounts, notes receivable and notes payable.
Post-dated cheques are common in wholesale, supply, contracting, real estate and car sales in Egypt and elsewhere. Where collection takes weeks, tracking each cheque’s date becomes part of daily financial management, not a monthly review.
What is the difference between notes receivable and notes payable?
Notes receivable are cheques you have received from customers and are waiting to collect, so they are an asset. Notes payable are cheques you have issued to suppliers that have not yet been cashed, so they are a liability. Anzma gives each its own account in the ledger, and their balances show in the balance sheet until the cheque clears.
| Aspect | Notes receivable (incoming) | Notes payable (outgoing) |
|---|---|---|
| Party | Customer | Supplier |
| Nature of the account | Asset | Liability |
| When recorded | Customer balance falls | Supplier balance falls |
| On collection or cashing | Cash rises in the bank | Cash falls in the bank |
| Main risk | The cheque bounces | Insufficient bank balance on the due date |
What are the statuses of an incoming cheque and the entry for each?
An incoming cheque has five main statuses. It starts “in safe” when you receive it, becomes “under collection” after you deposit it in the bank, then “cleared” when the bank pays it or “bounced” if the bank refuses. If you never deposit it, you may return it to the customer or endorse it to a supplier.
The table shows the entry the system posts at each move. Names are simplified; the actual accounts are notes receivable, cheques under collection, bank and customers in your chart.
| Event | Status afterwards | Entry |
|---|---|---|
| Cheque received from customer | In safe | Dr notes receivable / Cr customers |
| Deposited at the bank | Under collection | Dr cheques under collection / Cr notes receivable |
| Collected | Cleared | Dr bank / Cr cheques under collection |
| Bounced | Bounced | Dr customers / Cr cheques under collection |
| Returned to the customer | Returned | Dr customers / Cr notes receivable |
| Endorsed to a supplier | Endorsed | Dr suppliers / Cr notes receivable |
How do I record a bounced cheque?
A bounce is recorded on a cheque that is “under collection”, with its date, reason and any bank charges. The system reverses the deposit entry and cancels the receipt that settled the invoice, so the invoice reopens and the customer owes it again. If the bank charged a fee, it is recorded as a bank charge against the bank account.
The system sends an in-app alert to the authorised team and an email to the customer about the bounced cheque if the customer has an email on file. If you turned on the credit-stop setting, the customer is flagged and their credit limit is cut, so nothing more is sold on credit until the matter is settled. This is the accounting treatment of a bounced cheque: the debt does not disappear, it returns to where it was.
- 1
Record the bounce
On the under-collection cheque choose bounced and enter the reason, date and bank charges.
- 2
The system reverses the effect
The deposit entry reverses, the receipt is cancelled and the invoice is unpaid again.
- 3
Follow up the customer
An alert reaches the team and an email the customer, and credit can be stopped until they pay.
How do I record a cheque received from a customer?
An incoming cheque is recorded in two ways. From the incoming cheques screen you choose the customer and enter the cheque number, bank, drawer, due date and amount, then link it to a specific invoice or let it allocate to the customer’s oldest open invoices. Or it is recorded when you collect an invoice, because “cheque” appears as a payment method beside cash and transfer on the receipts screen and in installments and down payments.
Either way a receipt and a cheque are created, with the cheque “in safe”, and the customer’s balance falls immediately in their statement. The due date is what matters. It can be weeks or months after receipt, and it drives the system’s reminders and calendar.
- 1
Record the cheque
Enter its details and due date and link it to the customer’s invoice.
- 2
Keep it in the safe
It appears in the in-safe register, the status board and the due-date calendar.
- 3
Deposit when due
Pick the bank account and date, and the cheque moves to under collection.
What controls protect the cheque cycle?
Cheques are among the most sensitive financial items, so permissions are tight. They split into viewing incoming cheques, registering them, changing their status (deposit, clear, bounce, endorse), deleting and exporting, with the same for outgoing plus a separate print permission. Others cover cheque books, print layouts, settings and reports. A cashier can register a cheque without being able to cancel its collection.
The system checks every move: a cheque is bounced only while under collection, endorsed only while in the safe, and an outgoing cheque is cashed only while issued. Each cheque keeps an event log showing who did each step and when, so the trail can always be reviewed.
- Separate permissions for incoming, outgoing, printing, books and layouts.
- Every move is logged with its user and date on the cheque’s history.
- A cheque cannot skip stages: only permitted transitions.
What mistakes are common in cheque management?
The first mistake is recording a post-dated cheque as cash, which shows money in the treasury that has not reached the bank and leads to spending against imaginary liquidity. The second is forgetting the deposit date: a cheque a month in a drawer may pass the period in which the bank accepts it, which complicates collection. The third is not linking a bounced cheque to its invoice, so the invoice stays paid in the books when it is not paid in fact.
Paper systems fall into these because nobody checks the drawer daily. In the system it is enough to open the status board each morning: what is in the safe and due, what is under collection and not yet confirmed, and what has been issued to suppliers and awaits cashing.
The period for presenting a cheque and the consequences of a bounce are set by each country’s rules, so ask your legal adviser which periods apply to you.
How does the outgoing cheque cycle work for suppliers?
When a supplier is paid by cheque, the accountant picks the bank account the cheque is drawn on, and the payment is recorded against notes payable, not the bank. The supplier’s balance falls at once, but the bank balance does not fall until the supplier cashes the cheque. The ledger’s bank balance therefore stays equal to the bank statement.
An outgoing cheque has three statuses: issued, then cleared when the supplier cashes it, posting from notes payable to the bank, or cancelled if it was never presented, which cancels the supplier payment and reopens the bill. Cheque numbers are drawn automatically from the cheque book of that bank.
| Event | Status afterwards | Entry |
|---|---|---|
| Cheque issued to the supplier | Issued | Dr suppliers / Cr notes payable |
| Supplier cashes the cheque | Cleared | Dr notes payable / Cr bank |
| Cancelling a cheque never presented | Cancelled | Reverses the supplier payment and reopens the bill |
How do I see which cheques fall due this week?
Two screens give the full picture. The status board shows cheques as columns by status with each column’s count and total, so you see how much collection you are awaiting and how many issued cheques have not been cashed. The due-date calendar is a monthly grid of what falls due each day, with the month’s incoming and outgoing totals.
You do not need to open them every morning, because the system sends an in-app notice a number of days before a cheque is due, set in settings (three by default), another on the due date, and a third for an overdue cheque still in the safe. A notice is not repeated for the same cheque, and goes to users who can edit cheques.
Reports go deeper: cheques in the safe by due date, cheques under collection, issued cheques not yet cashed, and a summary by bank. All export to Excel and PDF.
- A status board with count and total per column.
- A monthly due-date calendar with incoming and outgoing totals.
- Reminders before the due date, on it, and when overdue.
- Reports: in safe, under collection, issued not cashed, by bank.
How do I print cheques on the bank’s layout?
Each bank has its own cheque leaf with its own size and field positions. In the module you create a print layout setting the leaf width and height in millimetres and the position of each field: date, payee, amount in figures, amount in words, the crossing line, cheque number and a memo. You test the layout on a sample file before printing, so no real cheque leaf is wasted.
The layout is tied to the bank account, so an outgoing cheque prints straight onto the leaf with its fields, with the amount in words in Arabic. For issuing, you define cheque books: a number series and prefix. The system takes the next number at each issue and closes the book when it is used up, so no number repeats or is skipped.
What are endorsement and returning a cheque to the customer?
Endorsement means paying a supplier with a cheque you received from a customer, without depositing it. In Anzma you choose the in-safe cheque and the supplier, a payment is recorded to the supplier from notes receivable and allocated to the open bills, and the cheque becomes “endorsed”. It saves a whole cycle of deposit and withdrawal.
Returning is for when a customer asks for their cheque back before you deposit it, perhaps to replace it with cash or another cheque. The system sets it to “returned” and cancels the receipt so the invoice reopens. Both actions apply only to a cheque that is in the safe.
What does one cheque’s cycle look like from start to finish?
An illustrative example: you sell goods worth 50,000 and the customer hands you a cheque dated three weeks ahead. You record it with its due date, the customer’s balance falls and 50,000 shows in notes receivable. Three days before the date you get the reminder. On the due date you deposit it and the amount moves to “under collection”.
After the bank pays it you record clearance and the amount enters the bank account. If it is refused you record the bounce with its reason and, say, 150 of charges: the invoice reopens at 50,000 and 150 is booked as bank charges. Either way the bank balance in the ledger matches the bank statement, which the bank reconciliation relies on.
The point is that every cheque has a clear history of events: who received it, when it was deposited, when it cleared, and the entry each step produced. When the auditor asks at year end for the notes receivable balance, you open the in-safe and under-collection reports and match their total to the ledger in minutes.
Who is the module for and how does it connect to the rest of accounting?
It helps any business that accepts payment by cheque on credit terms. Ceramics warehouse software and building materials store management software sell to contractors on post-dated cheques, car showroom management software receives installment cheques, tender and supply management software pays suppliers and collects from entities by cheque, and real estate development software collects unit installments as cheques.
The module links to cash and bank management software for bank accounts and reconciliation, to sales and invoicing software because a cheque is a payment method for an invoice, and to the general ledger for the notes receivable and payable accounts. All sit in one accounting software line.
To see the cycle on your own cheques and set up your bank’s print layout, book a free online meeting.
Frequently asked questions
What is the cheque cycle?
It is a cheque’s journey from receipt or issue until it clears or bounces. Anzma tracks each cheque’s status: in safe, under collection, cleared or bounced for incoming; issued, cleared or cancelled for outgoing; and posts the entry for every move to the ledger automatically.
What is the difference between notes receivable and notes payable?
Notes receivable are cheques received from customers and awaiting collection, an asset. Notes payable are cheques you issued to suppliers that are not yet cashed, a liability. The system gives each its own ledger account and both appear in the balance sheet.
How do I record a bounced cheque?
On the under-collection cheque choose bounced and enter the reason, date and bank charges. The system reverses the deposit entry, cancels the receipt so the invoice reopens, books the charges, alerts your team and the customer, and can stop the customer’s credit.
How do I see which cheques are due this week?
Open the due-date calendar for incoming and outgoing cheques day by day, or the status board for totals per status. The system also sends a notice before the due date by the number of days you set, on the due date, and for overdue cheques still in the safe.
Can cheques be printed on a bank layout?
Yes. You create a print layout per bank with the leaf size and each field’s position in millimetres: date, payee, amount in figures and words, and the crossing line. You test it on a sample, then print outgoing cheques straight onto the bank’s leaf.
What are the entries for collecting a cheque?
On receipt the cheque goes to notes receivable against the customer. On deposit it moves to cheques under collection. When the bank pays it, the amount moves from under collection to the bank account. All post automatically and the entry opens from the cheque.
Can I deposit a cheque before its due date?
Not by default. The system blocks depositing a post-dated cheque before its date so it does not bounce, and lets a user with permission choose an early deposit explicitly when agreed with the bank. After deposit the cheque stays under collection until the bank pays.
Can I pay a supplier with a cheque I received from a customer?
Yes, by endorsement. Pick an in-safe cheque and the supplier, and a payment is recorded to the supplier from notes receivable and allocated to their open bills; the cheque becomes endorsed. You do not need to deposit it or withdraw cash.
Part of the product line
accounting software
Double entry that posts itself from sales, purchases, treasury and payroll, financial statements and a VAT report, and seven modules covering the ledger, cash, cheques, assets and cost.
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


