On this page
Which financial reports does Anzma include?
The module has ten financial reports opened from one hub, all built from the same book maintained by general ledger software. Once an entry posts, its effect shows in every report with no manual refresh.
The table summarises what each report answers and who usually reads it. Each has a period or as-of filter, and branch and cost center filters where they apply.
| Report | What it answers | Who reads it |
|---|---|---|
| Trial balance | Are the books balanced, and what is each account’s balance | Accountant, auditor |
| Account statement and ledger | Every movement on one account with running balance | Accountant |
| Journal report | All entries and their lines in a period | Auditor |
| Income statement | Did we profit this period, and from where | Manager, owner |
| Balance sheet | What we own and owe at a date | Manager, bank |
| Cash flow | Where cash came from and went | Finance manager |
| Customer and supplier statements | A party’s balance, movements and aging | Collector, buyer |
| Aging | Who is late and by how long | Collector, manager |
| VAT | Tax collected, paid and net | Accountant |
| Cost center profit and loss | Profit of each project or department | Manager |
What is a trial balance and how is it read?
A trial balance lists the balance of every ledger account at a date, debit and credit, and the two sides total the same if entries are balanced. It is the first thing an auditor asks for and the starting point for the financial statements.
In Anzma it has three pairs of columns: opening balance, period movement and closing balance. You can pick the tree level to show only main groups or detailed accounts, hide zero accounts, and filter by branch and cost center. Totals come from detail accounts, and a group’s figure is the sum of its children.
An illustrative example with made-up figures for a small trading company after one month:
| Account | Debit | Credit |
|---|---|---|
| Cash and bank | 120,000 | |
| Customers | 80,000 | |
| Inventory | 150,000 | |
| Suppliers | 90,000 | |
| Capital | 200,000 | |
| Sales revenue | 180,000 | |
| Cost of sales | 90,000 | |
| Operating expenses | 30,000 | |
| Total | 470,000 | 470,000 |
What is the difference between a trial balance by totals and by balances?
A totals trial balance shows the total debits and total credits recorded on each account; a balances trial balance shows only the net difference on the side that wins. Overall both give the same grand total.
Anzma’s trial balance gives both in practice: period movement as debit and credit, then the closing balance as a single net figure. You do not need two reports. For an after-adjustments trial balance, post the adjusting entries and run the same period again.
How do the income statement, balance sheet and cash flow differ?
The income statement measures performance over a period: revenue minus costs and expenses equals net profit. The balance sheet is a snapshot of financial position: assets equal liabilities plus equity. The cash flow statement follows cash: what entered the cash boxes and banks and what left.
Anzma’s income statement runs revenue, cost, gross profit, operating expenses, other income and expenses, then net profit. It can show monthly columns or compare with the previous period or year with percentage change, and it excludes closing entries so a closed year shows its full result.
The balance sheet includes the current year’s profit before it moves to retained earnings, so assets equal liabilities plus equity at any date. Cash flow uses the direct method: each counter line of a cash entry is classified by its account into customers, sales, suppliers, expenses and taxes (operating), fixed assets (investing), and equity and loans (financing), tying opening cash plus net change to closing cash.
| Statement | Measures | Time | Equation |
|---|---|---|---|
| Income | Profitability | Period | Revenue - costs = profit |
| Balance sheet | Financial position | Date | Assets = liabilities + equity |
| Cash flow | Liquidity | Period | Opening + net change = closing |
How do I read an income statement?
Start at the top: revenue, then cost of sales; the difference is gross profit, which shows the margin of your core activity. Operating expenses such as rent and salaries come next, giving operating profit, then other income and other and financial expenses lead to net profit.
A made-up monthly example. Gross margin is clear from the third row, and rising operating expenses are what eat the profit:
| Item | Amount | Share of revenue |
|---|---|---|
| Revenue | 180,000 | 100% |
| Cost of sales | (90,000) | 50% |
| Gross profit | 90,000 | 50% |
| Operating expenses | (30,000) | 17% |
| Net profit | 60,000 | 33% |
What is the difference between the account statement, ledger and journal report?
The account statement or general ledger shows every movement of one account with dates, documents and a running balance; it is how you trace why an account has its balance. The journal report shows the entries themselves with all their lines in a period, better for a full review.
From any line you open the entry and then its source document, so you go from a trial balance figure to the account, the entry and the invoice or voucher. Auditors ask for exactly this chain. It all rests on the quality of entries in accounting and on cash and bank movements.
How do I find out who is late paying?
The aging report shows how much debt is how many days old, in four buckets: 0-30, 31-60, 61-90 and over 90 days. Oldest invoices are settled first (first in, first out) and unapplied payments show in their own column. It works for customers (owed to you) and suppliers (owed by you).
A customer or supplier statement shows the opening balance, documents and payments with a running balance and the aging below it, so the collector sends a clear statement before any call. The balances come from the same data as customer accounts, so they never disagree.
- Sort so the biggest debtors are at the top.
- Use the as-of date to age debt on any past day.
- Zero-balance accounts are hidden by default.
Does the system produce a VAT report?
Yes. It reports output VAT on sales, input VAT on purchases and expenses, and the net payable, from the tax lines recorded in the ledger. Sales are laid out like the Egypt return (default rate 14%: taxable, exempt and zero-rated) or the Saudi return (default rate 15%: standard-rated, zero-rated and exempt, plus purchases and adjustments), with a breakdown by rate that links to the VAT accounts.
It is a tool for preparing and checking the return, not for filing it. Rates and forms can change, so check the official body in your country: the Egyptian Tax Authority or ZATCA. Sending the invoices themselves is handled by ETA e-invoice integration or ZATCA e-invoicing software.
Which filters and exports are available?
Reports share filters for period or as-of date, branches, cost centers, comparison with the previous period or year, tree level and display currency. Display currency converts figures at the last known rate on the report date for viewing only; the ledger stays in your base currency.
Each report exports to Excel with real, calculable numbers and bold totals, or to an A4 PDF that turns landscape when there are many columns and supports Arabic right to left. Files carry company name, period and tax number. Each report has its own view and export permissions, so you can hide what you choose from whom you choose.
- The cost center profit and loss report shows a column per center and a total.
- It suits a company that wants each project’s profit, with cost center accounting software.
- Each report can be limited to the branches a user may see.
How do I use the reports to close the month?
A report is worthless if it is not part of the routine. This sequence suggests a disciplined monthly close; your accountant can adjust it to your activity.
- 1
Review draft entries
Open the journal report and make sure no drafts remain dated in the month; drafts do not reach the reports.
- 2
Run the trial balance
Confirm both totals match and review odd balances, such as negative inventory or a credit customer.
- 3
Match customers and suppliers
Compare aging with statements of your biggest parties and chase late payers before closing.
- 4
Issue the statements
Run the income statement with the previous month for comparison, the balance sheet and cash flow, and export PDFs for management.
- 5
Prepare tax and close
Run the VAT report for the month, then close the period in accounting so nothing changes after the reports are delivered.
What is a balance sheet and how do I read it?
A balance sheet, or statement of financial position, is a snapshot of what the company owns and owes on a given date. One side holds assets (cash, customers, inventory, fixed assets); the other holds liabilities (suppliers, loans) and equity (capital and profit). The two sides must always be equal.
Read it top-down: liquidity and current assets, fixed assets, short- and long-term obligations, then equity. In Anzma it is computed up to any date you choose and includes the current-year profit before it is moved to retained earnings, so it balances without waiting for year-end close. This example continues the simplified trial balance above, with illustrative figures:
| Side | Item | Amount |
|---|---|---|
| Assets | Cash and bank | 120,000 |
| Assets | Customers | 80,000 |
| Assets | Inventory | 150,000 |
| Total assets | 350,000 | |
| Liabilities | Suppliers | 90,000 |
| Equity | Capital | 200,000 |
| Equity | Current-period profit | 60,000 |
| Total liabilities and equity | 350,000 |
What is a cash flow statement and what is the direct method?
A cash flow statement shows how the cash balance changed over a period: where money came from and where it went, grouped into operating, investing and financing. Profit is not cash; a profitable company can run dry because customers have not paid.
The direct method lists actual receipts and payments instead of starting from profit and adjusting it, and it is what Anzma uses. The report scans every entry that touched a cash or bank account and classifies the counter account: customers, sales, suppliers, expenses and taxes are operating; fixed-asset purchases are investing; capital and loans are financing. Transfers between two cash boxes cancel out. The system then asserts that opening cash plus net change equals closing cash, and a table below lists each cash box and bank balance.
An example for the same illustrative company, from day one:
| Section | Item | Amount |
|---|---|---|
| Operating | Received from customers | 100,000 |
| Operating | Paid to suppliers | (150,000) |
| Operating | Operating expenses paid | (30,000) |
| Financing | Capital deposited | 200,000 |
| Net change | 120,000 | |
| Opening cash | 0 | |
| Closing cash | 120,000 |
How do I read an aging report, with an example?
The report spreads each customer’s balance across buckets by invoice age since the due date. The older the bucket, the lower the chance of collection and the higher the follow-up priority. An illustrative example that matches the 80,000 customers balance in the balance sheet above:
| Customer | 0-30 | 31-60 | 61-90 | 90+ | Total |
|---|---|---|---|---|---|
| Customer A | 25,000 | 25,000 | |||
| Customer B | 10,000 | 15,000 | 25,000 | ||
| Customer C | 12,000 | 18,000 | 30,000 | ||
| Total | 35,000 | 15,000 | 12,000 | 18,000 | 80,000 |
How does the VAT report differ between Egypt and Saudi Arabia?
The system picks the report layout from the account’s country; the data comes from the same ledger. The table summarises what changes in layout. Rates, forms and deadlines can change, so always verify them with the Egyptian Tax Authority or ZATCA.
| Item | Egypt | Saudi Arabia |
|---|---|---|
| Standard rate shown | 14% | 15% |
| Taxable, zero-rated and exempt sales | Yes | Yes |
| Purchases section | Input VAT by rate | Standard-rated purchases and total |
| Adjustments | Within the net | Separate adjustments line |
| Result | Net payable | Net payable |
Why automatic financial statements instead of Excel sheets?
An Excel sheet depends on someone pasting numbers and copying formulas, so a single error in one copy makes the trial balance disagree with the ledger. In Anzma the report is a query on the ledger itself, so there is no second copy of the numbers.
| Aspect | Excel sheet | Anzma reports |
|---|---|---|
| Source of numbers | Pasted or typed | Posted entries directly |
| Refresh | When re-compiled | Live on posting |
| Balance | Checked by hand | Unbalanced entries cannot post |
| Traceability | Searching through files | Figure to account to entry to document |
| Access | Share the whole file | Separate view and export per report |
| Export | The file itself | Excel and PDF with company header |
Why does a report not match the ledger? Common issues and fixes
Most report differences come from a different filter or an unposted entry, not from a calculation fault. Check this list before changing anything.
| Symptom | Likely cause | Where to check |
|---|---|---|
| Trial balance does not tie | Filter range or a draft entry | Journal report for the period |
| Income statement differs from the ledger | Branches or cost centers filtered | Filters above the report |
| Customers in balance sheet differ from aging | Different as-of date | Report date |
| Cash flow differs from treasury | A cash box outside the filtered branch | Treasury balances table |
| VAT does not match invoices | A tax line without a rate | Adjustments line |
What should I issue at the end of the financial year?
At year-end the accountant needs a fixed pack for management, the bank and the auditor: the income statement for the full year, the balance sheet on the last day, the cash flow for the year, and the trial balance before and after closing. Because the income statement excludes closing entries, the year’s result stays visible after the accounts are closed and the result is moved to retained earnings, so you can print a closed year at any later time.
The closing steps are explained in the accounting module, but the order matters most: review, export, then close. Comparing with the previous year shows where each line grew or shrank.
- Trial balance with all detailed accounts, for the auditor.
- Income statement with prior-year comparison and monthly columns.
- Balance sheet on the last day and the cash flow for the year.
- Aging as of year-end to estimate doubtful balances.
- VAT report for each period to reconcile what was actually filed.
Which report does each role in the company need?
Not everyone needs every report, and the system has separate view and export permissions for each one, so you give each role only what it needs.
| Role | Key reports | Typical frequency |
|---|---|---|
| Owner | Income statement, cash flow, balance sheet | Monthly |
| Accountant | Trial balance, ledger, VAT | Weekly and monthly |
| Collector | Aging and customer statements | Daily |
| Buyer | Supplier aging and statements | Weekly |
| Branch or project manager | Cost center profit and loss | Monthly |
| External auditor | Journal report, ledger, trial balance | Yearly |
Who is this module for, and when do I start?
It suits any company that wants statements on time without re-gathering numbers. A wholesale management system manager follows aging daily, a contracting company system reads each project’s profit, an accounting firm system hands clients PDF statements, a factory management system tracks cost and margin, and a consulting firm system watches contract profitability.
The reports are part of a connected accounting software line, available on every plan, and only as accurate as the entries. Book a free online meeting and we will run the reports on data like your own. Plans are on the pricing page.
Frequently asked questions
What is a trial balance?
It is a list of every ledger account’s balance at a date, debit and credit, whose two sides total the same when entries are balanced. Accountants and auditors use it to check the books before preparing statements, and Anzma produces it with opening, movement and closing figures.
What is the difference between a trial balance by totals and by balances?
A totals trial balance shows total debits and total credits per account; a balances one shows the net difference on the stronger side. Anzma’s trial balance shows period movement as debit and credit with the closing balance as a net figure, so you get both in one report.
What is the difference between the income statement and the balance sheet?
The income statement measures profit or loss over a period as revenue minus costs. The balance sheet shows what the company owns and owes at a date, where assets equal liabilities plus equity. Both are built from the same ledger.
Are the reports real time?
Yes. They are built from posted entries in the ledger, so a transaction shows in the report as soon as it posts, with no manual refresh. Draft entries are not included until posted, and entries dated in a period appear when you select that period.
Can I export reports to Excel and PDF?
Yes. Each report exports to Excel with real numbers and highlighted totals, or to an A4 PDF that supports Arabic right to left. Files carry the company name, period and tax number. You need the export permission of the specific report.
Does the VAT report produce the return for filing?
It produces a report of output VAT, input VAT and net payable, laid out like the Egypt or Saudi return to make preparation easier. It is a review tool, not a filing: your accountant submits through the official portal and checks the latest forms and rates.
Are there reports per cost center?
Yes. The cost center profit and loss report has a column per center, a column for no center and a total, with the same sections as the income statement. You can also filter the trial balance and income statement by one or more centers. The cost centers module must be enabled.
How do I see customer aging?
Use the aging report, which spreads what is owed across four buckets by invoice age: up to 30 days, 31 to 60, 61 to 90 and over 90. It works for customers and suppliers, applies payments to the oldest items first, and shows unapplied payments separately.
Can I view reports in another currency?
Yes, for display. The display currency converts figures at the last known rate on the report date and warns you when no rate exists. The ledger itself stays in the company’s base currency, and the rates come from the accounting module.
What is a trial balance after adjustments?
It is the same trial balance after the closing adjustment entries, such as depreciation, accruals and prepayments, are posted. In Anzma you post the adjusting entries and re-run the same period, which gives the adjusted balance the statements are built from.
Does the balance sheet balance automatically?
Yes, because every posted entry is balanced and the report includes the current-year profit before it is moved to retained earnings. Assets therefore equal liabilities plus equity on any date, even before the year is closed.
How do I read the cash flow statement?
Start with net operating cash: do your activities generate cash? Then investing (asset purchases) and financing (capital and loans). Together they give the net change, which with opening cash gives the closing cash that matches your treasury balances.
Part of the product line
accounting software
Double entry that posts itself from sales, purchases, treasury and payroll, financial statements and a VAT report, and seven modules covering the ledger, cash, cheques, assets and cost.
Official sources
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


