Skip to content
Anzma modulePart of Sales

Sales commission software and target system for reps

Monthly targets per rep, team or branch, commission plans on invoiced sales, collections or gross profit, and a monthly run that is approved, then paid with payroll or from the treasury.

Last updated: 6 min readBe the first to rate this page
Sales commission software and target system for reps

In short

Anzma’s targets and commissions module sets a target for each rep and calculates their commission automatically from their invoices under a commission plan, with a leaderboard. It supports commission on invoiced sales, collections or gross profit, paid through payroll or from the treasury.

Who is it for?

  • Distribution and wholesale
  • Car showrooms
  • Real estate developers
  • Travel agencies
  • Recruitment offices
  • HVAC and contracting firms
Target for
A rep, team or branch; monthly, quarterly or yearly
Target measure
Invoiced sales, collections, gross profit or quantity
Commission basis
Invoiced, collected or gross profit
Plan methods
Flat rate, tiers, per category or amount per unit
Payout
With payroll as a commission item, or by treasury voucher
Rep requirement
A system user recorded on the invoice

What you get, at a glance

  • Targets per rep and team

    A monthly, quarterly or yearly target for a rep, team or branch, optionally limited to a category or item, with progress moving on every invoice.

  • Three commission bases

    Calculate on net invoiced sales, on what was actually collected from customers, or on gross profit after cost, as your policy requires.

  • Four plan methods

    A flat rate, tiers by target achievement whole or marginal, a rate per category, or a fixed amount per unit sold.

  • A leaderboard

    Rank reps and teams for the month on the measure you choose, so the team can see who leads and who is catching up.

  • My targets and commissions

    Each rep opens a page with their target, progress and current commission estimate, so managers are not asked for the position every week.

  • Approve, then pay

    A monthly run goes through approval and posts an accrual, then is paid by treasury voucher or sent to payroll as a commission item.

Inside the product

Target trackingIllustrative screen of indicators and progress, not real customer data.
On this page
Section 01

What are a sales target and a commission?

A target is a number a rep, team or branch is asked to reach in a period, such as sales of 100,000 a month. A commission is the pay a rep earns on their sales, as a percentage, tiers or an amount per unit. One program holds both, so commission is calculated straight from system invoices with no side spreadsheets.

The module sits in Anzma’s sales management software and reads sales invoicing software documents, their receipts and returns. People search for it as “rep commission software”, “sales target software” or “sales incentive software”; the need is the same: a transparent calculation both rep and manager trust.

Section 02

How do I set a target for a rep, team or branch?

A target has five elements: for whom, for which period, on which measure, at which value, and whether it is general or limited to a category or item. Once saved, its achievement is calculated live from posted documents, and a progress bar moves with each invoice.

Target elements and their options
ElementOptionsExample
ForA rep, a team (several users) or a branchThe Cairo sales team
PeriodMonth, quarter or yearJanuary
MeasureInvoiced sales, collections, gross profit, quantitySales of 100,000
NarrowingAn optional category or itemThe air conditioner category
AlertsThresholds you set; default 50%, 80% and 100%Alert at 80%
Section 03

How is a commission plan built?

A commission plan is a rule that turns a calculated basis into money. You set the basis and the method, then assign the plan to the reps concerned. Plans can differ between teams: one for wholesale reps and another for showroom reps.

  1. 1

    Pick the basis

    Commission on net invoiced sales, on collections, or on gross profit.

  2. 2

    Pick the method

    A flat rate, tiers by target achievement, a rate per category, or an amount per unit.

  3. 3

    Add its limits

    A guaranteed minimum and a cap on the commission, how returns are treated, and start and end dates.

  4. 4

    Assign it to reps

    Link each user to their plan so the monthly run calculates their commission.

Section 04

How does the result change with the plan?

An illustrative example with made-up numbers. A rep has a monthly target of 100,000 and achieved net sales of 90,000, an achievement of 90%, of which 50,000 was in the appliances category and 40,000 in accessories. Each method gives a different result from the same sales.

Example: the same rep under four plans (illustrative figures)
PlanRuleCalculationCommission
Flat rate2% of the basis2% × 90,0001,800
Whole tiersUnder 80%: 1%, 80% to 100%: 2%Achievement 90%, so 2% on the whole basis1,800
Marginal tiersSame tiers, each takes its share1% on the first 80,000 and 2% on 10,0001,000
Per categoryAppliances 1.5%, accessories 4%750 + 1,6002,350
Section 05

Is commission calculated on the sale or on the collection?

Your choice, set in the plan. Commission on invoiced sales is counted when the invoice is issued even if the customer has not paid, and is the simplest. Commission on collections counts only when the customer pays, and goes to the salesperson of the invoice the payment settled. Gross profit commission works on the gap between selling price and cost, which encourages reps to hold the price.

Only posted documents count: an issued, partly paid or paid invoice, so drafts have no effect. The default basis is set in the module settings and can differ per plan.

Commission basis: when it counts and what it suits
BasisCounted atSuitsWatch out
Invoiced salesInvoice issueCash or short-term salesYou may pay commission on unpaid debt
CollectionsCustomer paymentCredit sales and installmentsCommission lags the customer
Gross profitInvoice issue, on the gap after costSales at varying pricesNeeds accurate item cost
Section 06

What happens to commission when a customer returns goods?

Returns are deducted from the basis by default, so the system takes back commission on returned goods. In commission on collections, cash refunded to the customer is deducted from the rep’s basis. If you switch the deduction off in the plan, returns are ignored and do not affect commission.

In amount-per-unit plans returned units are deducted at the same amount. If the month’s net is negative the commission becomes zero rather than a negative amount, and a flag on the rep’s statement explains why, so a reviewer is never left guessing.

Section 07

What does a rep’s commission statement look like?

The statement shows the basis, returns, net, achievement, effective rate and commission, then each document line that went into the calculation with its invoice number, date and share. A rep can check every figure and an accountant can trace it back to the invoice.

Example: a rep’s statement for a month (illustrative figures)
ItemValue
Gross invoiced sales90,000
Returns6,000
Net basis84,000
Target and achievement100,000, so 84%
Rep’s planWhole tiers: 2% between 80% and 100%
Calculated commission1,680
Section 08

What are common mistakes when designing incentives?

A good plan rewards the behaviour you want without opening a door to gaming. These mistakes recur, and each can be avoided in the module’s settings.

  • Commission on invoiced sales alone in credit selling, so you pay on debts that may never be collected. Consider collections.
  • A target so high that the upper tiers are out of reach and the team loses heart. Review it quarterly.
  • A flat rate on gross profit without accurate item cost, so commission moves on unreal results.
  • Forgetting a cap during exceptional deals, which makes one deal’s commission huge.
  • Mixing reps on one invoice. The system attributes an invoice to one rep, so set it at the sale.
Section 09

How are commissions approved and paid?

At month end you create the commission run for the month, and the system builds a statement for each rep from the month’s invoices, receipts and returns under their plan. You can rebuild it while it is still a draft. It then goes to approval; once approved an accrual entry is posted in the accounts and the reps are notified.

An approved run is paid in one of two ways: a payment voucher from a treasury or bank account in the company currency, or a file imported into payroll software as a commission item per rep, which needs each rep to have an employee record linked to their account. A run can be cancelled until it is paid.

Only one live run exists per month, so a rep’s commission cannot be paid twice by mistake. If you cancel an approved run before paying, the accrual is reversed and the month is open for a new run, so you correct the plan or the invoices and recalculate. After payment the run is closed and stays in the payout register for review.

  1. 1

    Create the run

    A draft for one month, where rep statements are calculated from posted documents.

  2. 2

    Review statements

    Open each rep’s statement to see invoices, basis, rate and commission, and rebuild if you change a plan.

  3. 3

    Approve

    It goes for approval according to your approval flow, and then the accrual entry posts.

  4. 4

    Pay

    A treasury voucher, or a commission file imported into payroll.

Section 10

What do managers and reps see?

Managers get target screens with live progress bars, commission plans, the monthly run, a leaderboard for people and teams, and reports on targets, achievement, the payout register and rep statements. An in-app alert reaches the people concerned when a target hits a threshold you set, by default 50%, 80% and 100%, once per threshold.

Reps get a “My targets and commissions” page showing their target, progress and an estimate of their commission from invoices to date, without seeing colleagues’ commissions. Permissions control who sees what.

Section 11

Which reports do I get?

Four reports answer the manager’s, accountant’s and rep’s questions, and can be exported where export permission allows.

Targets and commissions reports
ReportShowsUseful for
TargetsEach target with scope, measure and valueReviewing what was set for the team
AchievementTarget, achieved, percent and statusWho is behind and who is ahead
Payout registerCommission paid and howReconciling treasury and payroll
Rep statementsEach rep’s basis, commission and linesTransparency and review
Section 12

How does the module connect to the rest of the system?

It needs no duplicate entry because it reads what your team already enters. These are the touchpoints along the data flow:

Section 13

Who is commission software for?

Any business whose reps or sellers are rewarded for performance. These are examples, and each industry page explains its details:

Section 14

How do I start with targets and commissions in Anzma?

Add your reps as users, record the rep on every invoice, create a simple flat-rate plan, set a target for one month and try a draft run on last month. Then approve the real plan. It works with customer accounts software and cash and bank management software. To compare tools read the ERP buying guide.

Book a free online meeting and we will build commission plans around your policy; see pricing for plan limits.

Frequently asked questions

How is a rep’s commission calculated?

By the plan assigned to them: a flat percentage of the basis, a rate that changes with target achievement, a rate per category, or an amount per unit. The system calculates it from posted invoices, deducts returns, applies a minimum and cap if set, and shows the working line by line on their statement.

Is it calculated on the sale or on the collection?

You choose in the plan between three bases: net invoiced sales, actual collections from customers, or gross profit. Collection commission goes to the salesperson of the invoice the payment settled, and moves only with posted receipts.

Can I set commission tiers?

Yes. You define tiers by target achievement, each with a commission rate. In whole mode the rate of the band the achievement falls in applies to the entire basis; in marginal mode each band’s rate applies only to its share of the basis.

Can a rep see their target and commission?

Yes. On “My targets and commissions” a rep sees their target, achievement and commission estimate to date. They do not see colleagues’ commissions unless you grant permission, and they receive notifications at achievement thresholds and when the month’s commissions are approved.

Does commission flow into payroll?

Yes. An approved run exports as a file imported into payroll as a commission item per employee, which requires the rep to have an employee record linked to their account. Or you pay it by treasury voucher instead, in which case the account must be in the company currency.

What is a sales target?

A number a rep, team or branch is asked to reach in a month, quarter or year, measured by sales, collections, gross profit or quantity. The system tracks achievement from invoices immediately and sends an alert when it passes thresholds you set.

Can one invoice’s commission be split between reps?

No. An invoice is attributed to one rep, who must be a system user, and the commission is calculated for them. If two reps share a sale you must handle that outside the system for now, or split the sale across two invoices.

Is there free commission software?

You can calculate commission in Excel, but it is manual and error-prone and does not link the calculation to invoices, collections, returns or payroll. Anzma is cloud software on a plan-based subscription, and commissions are part of the sales line. Book a free online meeting and we will show it on your case.

Part of the product line

sales management software

Seven modules for invoices, POS, promotions, price lists, installments, payment links and commissions, posting every sale to stock, accounts and e-invoicing.

All Sales modules

Rate this page

Did you find this useful? Your rating helps others.

No ratings yet.

Share this pageWhatsAppXLinkedInFacebook
Pricing

Clear plans that grow with you

Nearly every module in every plan; plans differ by limits.

Basic

For small businesses getting started

450EGP / mo

Billed 5,400 EGP yearly

Save 24%

Includes:

  • 3 users and one branch
  • 150 invoices per month
  • Every module your activity needs
  • 5GB storage
Book a meeting
Most popular

Advanced

For growing businesses with several branches and warehouses

790EGP / mo

Billed 9,480 EGP yearly

Save 20%

Everything in Basic, plus:

  • 7 users, 2 branches and 3 warehouses
  • 750 invoices per month
  • 2 POS devices
  • 15GB storage
Book a meeting

Comprehensive

Everything: unlimited invoices, manufacturing, custom domain and API

1,590EGP / mo

Billed 19,080 EGP yearly

Save 20%

Everything in Advanced, plus:

  • 15 users, 3 branches and 5 warehouses
  • Unlimited invoices
  • Manufacturing, custom domain and API
  • 30GB storage
Book a meeting

Enterprise

For enterprises: open limits, dedicated server and SLA

Custom

Everything in Comprehensive, plus:

  • Unlimited users, branches and warehouses
  • Dedicated server and SLA
  • Storage on demand
  • Account manager and tailored onboarding
Contact us