On this page
What is a POS system and cashier software?
Cashier software is the screen where staff sell at the till; a POS (point of sale) system is the wider name for it together with shifts, receipts, stock and accounts. In practice the two terms mean the same thing, and the difference is how closely the till is tied to the rest of the business.
In Anzma it is the POS module, and every sale is a real invoice on sales and invoicing software, drawing down the device’s warehouse and posting to the ledger, so there is no separate “till book” that disagrees with the accounts at the end of the day. It is part of sales management software, which also covers invoices, installments and payment gateways.
It runs on paired devices: each till is defined with its branch, warehouse, price list and payment accounts, and paired with a token that stays in that device’s browser. The till does not work from an unpaired device.
How do you set up a till before the first sale?
The device is the unit of configuration, one per till. What you set here applies to every sale through it, so the cashier stays simple and the rules stay with the supervisor.
- 1
Define the device
Create a device with a name and code, and choose its branch and warehouse, so a sale draws down the right stock and reports by branch.
- 2
Pick the price list and walk-in customer
Choose a device price list if branch prices differ, and a walk-in customer per branch that cash sales are booked against.
- 3
Link payment accounts
Choose the cash account for cash and a bank account for card and wallet, so each method shows in its own account and is reconciled at close.
- 4
Set the receipt
Choose 80 or 58 mm paper, then the header, footer and automatic printing in POS settings.
- 5
Pair the device
Pairing issues a token stored in that device’s browser. If the device is lost you unpair it and it stops selling immediately.
What happens the moment a sale completes?
To the cashier it is one button. Behind it a chain of steps runs in a single transaction, so either all of it completes or nothing is saved.
- A numbered, issued sales invoice is created on the sales module with the prices, discounts and tax the system calculated.
- Each item’s balance drops in the device’s warehouse, and serial numbers are recorded for tracked items.
- A receipt is created per payment method on its account and tied to the open shift, so it appears in the close count.
- The entry for revenue, tax, receivable and cash posts, so the books update with no manual posting.
- An event fires that the Egypt e-receipt module or the Saudi ZATCA module picks up, if enabled.
- The sale is never duplicated: each has a unique id, so if the device resends after a drop the system recognises it and does not book it twice.
What does one sale with several payment methods look like?
The cashier splits a sale in the payment screen by adding a row per method and typing its amount, and the system shows what is left until the total is covered. Cash over the total produces change. Because each method has its own account, each part shows when that account is counted. An illustrative example with made-up numbers: a customer buys 1,450 and pays part in cash and part by card.
| Item | Amount | Where it shows |
|---|---|---|
| Invoice total after discount and tax | 1,450 | Sales invoice |
| Paid in cash | 1,000 | Cash drawer for the shift |
| Paid by card | 450 | Bank account linked to card |
| Left on the customer | 0 | No receivable |
How does a shift work from open to close?
A shift starts when it is opened with a cash float and ends when it is closed after a count of the drawer. Everything in between is gathered on the shift, which is what makes closing the day short.
- 1
Open the shift
The cashier opens the shift on their device with the opening balance for the cash drawer and any other payment accounts.
- 2
Sell and refund
Sales and refunds are recorded on the open shift, each a document linked to it.
- 3
Cash in and out
Put cash into the drawer or take it out, such as buying supplies or handing over a deposit, with a counter-account so it is booked.
- 4
X report
The cashier or supervisor pulls a report of sales by payment method, discounts and taxes without closing the shift.
- 5
Close with a count
The cashier counts the cash and enters it; the system compares it with the expected amount, saves the variance and posts it to a cash over and short account.
- 6
Move cash to the safe
Optionally the drawer cash is transferred at close to a safe or bank account, leaving the drawer ready for the next shift.
How is the variance calculated at close?
Expected drawer cash is the opening balance plus cash received and cash in, minus cash refunds and cash out. An illustrative example with made-up numbers for the cash drawer:
| Item | Amount |
|---|---|
| Opening float | 1,000 |
| Cash sales | 7,400 |
| Cash refunds | (300) |
| Cash out to buy supplies | (200) |
| Expected in the drawer | 7,900 |
| Counted | 7,880 |
| Variance (short) | (20) |
How does a cashier sell by barcode, and what shortcuts exist?
One box at the top searches barcode, code and item name together. The cashier scans with a standard reader that types the number like a keyboard, then Enter, and the item joins the cart; if the search matches only one item, Enter adds it. An item can have several barcodes and each selling unit its own, so a carton and a single piece of the same item both scan.
The screen has what a fast till needs: hold a sale and recall it to serve another customer, pick a customer or sell to the branch’s walk-in customer, enter a coupon or let promotions apply when the promotions module is on, and pick serial numbers for tracked items. Keyboard shortcuts include F1 for help, F2 for search, F3 for held sales, F4 for the customer, F7 for discount and F8 to hold.
The cashier does not sell at any price. The price comes from the device or customer price list, the discount is capped at a limit you set (20% by default) and needs the discount permission, and editing a price by hand needs its own permission. A credit sale on the customer’s account can be allowed with a setting and a dedicated permission.
- One search for barcode, code and name, and quick cash buttons you define (10, 20, 50, 100, 200 and 500 by default).
- Hold and recall a sale, clear the cart, and a note on each line.
- A discount on a line or the whole sale, within the allowed cap.
- Serial numbers for tracked items, and a gift card sold at an amount the customer chooses.
- Enrol a customer in the loyalty programme from the same screen when it is on.
Which payment methods does the till accept?
The base methods are three: cash, card and e-wallet, and each device has a cash or bank account per method. One sale can be split across more than one method, for example part in cash and the rest by card.
Note that card here is a recorded tender. The till does not connect to a card machine or a payment gateway directly: the cashier takes the card on the bank’s own terminal and records the amount on the sale, so reconcile card receipts against the bank statement.
Other tenders appear depending on the modules enabled: loyalty points from customer loyalty software, store credit and gift cards from store credit and gift card software, and a deposit held for the customer. Offers and coupons are applied to the cart automatically by promotions and discount software.
How are till receipts printed?
The receipt is laid out at 80 mm or 58 mm according to the device setting and printed from the browser print dialog, so any thermal printer your operating system knows will work. You set a header and footer, and can turn on automatic printing after each sale.
It shows the lines, discount, tax and payment methods, the details of any gift card sold, and a QR code on receipts where Saudi tax rules need one. We do not ship a special driver for cash drawers or printers, so choose hardware your operating system and browser recognise.
How does a till refund work?
The cashier looks up the invoice by number and picks the lines and quantities to return, which creates a real sales return linked to it and puts the quantity back in stock. The refund goes back in cash from the drawer, to the original payment method, or as store credit on the customer’s account when the customer credits module is on.
You set a refund window in days (zero means no limit), and refunds at the till have a permission separate from selling, so you can reserve it for supervisors. If the customer paid with points or a gift card, the refund is not paid in cash but as credit, so it cannot turn into unearned cash.
Does the POS work without internet?
Yes, for cashier sales only, with the “offline mode” setting that is on by default. The device caches items and prices, keeps sales in a queue inside the browser and sends them automatically when the connection returns, without duplicates. The rest of the system, meaning accounts, stock and reports, needs internet.
Each offline sale gets a temporary number that prints on the receipt, then takes its official invoice number when it reaches the server. On sync the system checks the batch belongs to that device and shift, and if anything does not match it rejects the whole batch and leaves it on the device rather than recording part. The feature has clear limits, so we do not promise more than this.
| Capability | Offline |
|---|---|
| Selling for cash, card or wallet | Works, syncs later |
| Barcode search and cached prices | Works |
| Opening a new shift | Does not work |
| Coupons and promotions | Do not work |
| Paying with points, store credit or gift cards | Does not work |
| Refunds | Do not work |
| Picking serial numbers | Does not work |
| Receipt with official number and QR | A temporary receipt prints without them |
How does the till connect to stock and accounts?
Each sale creates an issued invoice on the sales module, so everything moves in one step: the item balance drops in the device’s warehouse, revenue, tax and payment method post in an entry, and profitability reports update. You never post till sales by hand at the end of the day.
It relies on warehouse management software and general ledger software. Selling an item at zero balance follows the warehouse “allow negative stock” setting. Sales made offline are always accepted on sync and flagged “negative stock” for you to review, so the till never freezes in front of a customer. For counts, see stocktaking software.
Can you sell on credit from the till?
Yes, but it is off by default. The “allow sale on account” setting lets people you grant the permission sell on the customer’s account: the cashier picks a registered customer and leaves the sale, or part of it, unpaid, which becomes a receivable that shows on the customer statement and is collected later by receipt.
Because the invoice runs through sales and invoicing software, the customer’s credit limit applies. It suits small wholesalers and showrooms that sell cash and credit from the same screen. For instalment sales, use installment management software on the issued invoice.
What are common till mistakes and how do you avoid them?
Most till shortages come not from theft but from small repeated habits. The right settings close most of those doors.
- Sharing a shift: two cashiers on one shift lose the cause of any variance. Give each cashier their own shift.
- Uncapped discounts: set a maximum and give unlimited discount to one supervisor.
- Unrecorded cash out: every withdrawal goes through a cash-out entry with a counter-account, not cash leaving the drawer unrecorded.
- Counting with the expected figure visible: turn on blind close so the cashier counts what is really there.
- Closing late: open a new shift each day and do not leave yesterday’s open.
- Refund without an invoice: a refund is made against an existing invoice and within a window you set.
What do e-receipt and ZATCA rules mean for the till?
Requirements differ between the two countries, and the official authority decides who must comply and when, so check the Egyptian Tax Authority and ZATCA.
In Egypt, e-receipt software connects till sales to the e-receipt system using the POS device’s credentials. In Saudi Arabia, ZATCA e-invoicing software handles simplified till invoices with an invoicing unit per device or branch. Anzma integrates with both systems; we do not claim it is approved by either. For the wider picture, see e-invoicing software.
What hardware does the till need?
No special terminal. A computer or tablet with a modern browser and internet is enough, plus a barcode reader that acts like a keyboard and a thermal printer your system recognises. There is no dedicated mobile app for the till: the screen runs in the browser and adapts to smaller displays.
The number of paired till devices follows your plan: one on Basic, two on Advanced, four on Comprehensive, and unlimited on Enterprise; see the pricing page. Electronic scales and weighed-item barcodes are not supported at present.
How do you prepare items and barcodes before opening?
Till speed starts with clean item data. Add items in product catalog software with a price, unit and category, and record the manufacturer barcode if there is one. You can print barcode labels in Code128 and EAN-13 from item data to stick on items and shelves.
Because the system has no size and colour matrix, each size or colour is defined as its own item with its own barcode, which works for clothing and shoe shops since the cashier scans and gets the item in its size. Check opening quantities with a count through stocktaking software before selling.
How do you monitor cashiers and follow sales?
Each till capability has its own permission: using the screen, closing a shift, closing other people’s shifts, pairing devices, discounts, unlimited discounts, editing prices, credit sales and exporting reports. People who see all shifts are alerted when an offline sale breaks price or discount rules, so a breach does not pass silently. Reports export with their own permission.
- Shift variance report: who repeats a shortage or surplus, and by how much.
- Sales by shift, cashier, device and hour.
- Top-selling items and payment methods used.
- Refunds and offline sales, for review.
Which till suits each business?
The same till serves many trades, but each adds modules of its own. These are examples of who it is for; the activity page explains the terms, reports and modules for each in full.
- Shops: see retail store software.
- Supermarkets: many items and several barcodes. See supermarket software.
- Pharmacies: expiry and batches. See pharmacy management software.
- Mobile shops: serial numbers and installments. See mobile shop software.
- Restaurants and cafes: tables and a kitchen screen. See restaurant management software and cafe management software.
- Clothing shops: see clothing shop software; there is no size and colour matrix, so each size is its own item.
Standalone till, desktop program or cloud POS inside an ERP?
The table compares three categories of solution, not named products.
| Criterion | Standalone till | Desktop program | POS inside an integrated system |
|---|---|---|---|
| More than one branch | Varies | Hard | Available within plan limits |
| Live stock | Often not available | On one machine | Draws down the device warehouse |
| Shift close and cash count | Varies | Often available | Available, variance posted |
| E-receipt | Varies | Varies | Through the Egypt and Saudi modules |
| Automatic ledger posting | Not available | Varies | Automatic |
| Reports from anywhere | Varies | On the machine | Cloud-based |
How do you start with the Anzma POS?
Setup takes about a day for a small shop and longer with more items and branches. This is the short plan we follow with you. To compare options, read the guide to choosing an ERP system. The easiest start is to book a free online meeting: we show the till on your own items and decide the number of devices and the plan with you; plan limits are on the pricing page.
- 1
Prepare items
Add items with barcodes and prices, or import them from Excel, and check opening quantities.
- 2
Define devices
Create a device per till with its branch, warehouse and payment accounts, and pair it with the browser.
- 3
Try a shift
Open a test shift, sell with different payment methods, print a receipt, record a refund, then close it and review the variance.
- 4
Train the cashier
A cashier learns the shortcuts, refunds and holds in an hour; the supervisor needs to understand reports and closing.
Frequently asked questions
What is the difference between cashier software and a POS system?
There is no practical difference. Cashier software is the selling screen at the till; a POS system is the wider name including shifts, receipts, stock and accounts. In Anzma every sale is a real invoice that draws down stock and posts to the ledger.
Does it work on more than one device and branch?
Yes. Each till is a paired device with its own branch, warehouse, price list and payment accounts. The number of devices follows your plan: one on Basic, two on Advanced, four on Comprehensive and unlimited on Enterprise. All branches are managed from one account.
How do you close a shift and reconcile cash?
The cashier counts the drawer and enters it. The system compares it with the expected amount (opening float plus cash received and in, minus refunds and out), saves the variance and posts it. Cash can be moved to a safe at close, and blind close hides the expected figure.
Does it support e-receipts in Egypt?
The till connects to the Egypt e-receipt module using the POS device’s credentials. Anzma integrates with the Egyptian Tax Authority system and we do not claim approval from it. The authority decides who must issue e-receipts and when, so check its website and then book a meeting to set it up.
Does it meet ZATCA requirements?
Through the ZATCA module, which handles simplified till invoices with an invoicing unit per device or branch and prints a QR code on the receipt. Anzma integrates with the Fatoora platform under its published specifications; we do not claim approval. Check ZATCA for when integration applies to your business.
What hardware do I need?
A computer or tablet with a modern browser and internet, a barcode reader that acts like a keyboard, and a thermal printer your operating system recognises, at 80 or 58 mm. There is no dedicated mobile app for the till, and electronic scales and weighed-item barcodes are not supported at present.
Does it work without internet?
Cashier sales work offline: the device queues them and sends them on reconnect without duplicates. Coupons, paying with points, store credit or gift cards, refunds and opening a new shift do not work offline, and the temporary receipt has no QR code. The rest of the system needs internet.
Is there free POS software?
Free or desktop till programs usually have limited features: no stock shared between branches, no ledger posting and no e-receipt. Anzma’s POS is cloud software on a subscription by plan. Book a free online meeting and we will show it on your own items so you can compare.
Which till suits a restaurant or a supermarket?
The base till is the same, and the additions differ. Restaurants add tables and a kitchen screen; supermarkets add several barcodes and large stock. Read the closest activity page, restaurant management or supermarket management, and we will recommend the right modules in the meeting.
How do I control discounts and prevent misuse?
Cashiers have a discount cap you set (20% by default) and a discount permission; only someone with the unlimited-discount permission can exceed it. Editing a price by hand has its own permission, and supervisors are alerted if an offline sale breaks the price or discount rules.
Part of the product line
sales management software
Seven modules for invoices, POS, promotions, price lists, installments, payment links and commissions, posting every sale to stock, accounts and e-invoicing.
Official sources
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


