On this page
What is a stock count?
A stock count is counting the goods actually in the warehouse, comparing them with what the books say, and settling the difference. It is the only check that reveals theft, unrecorded damage and entry errors, and the stock valuation in your financial statements depends on it. The later you count, the more differences pile up and the harder their cause is to trace.
In Anzma this is the stocktaking module (key: stocktaking), part of the inventory management software. It relies on warehouse management, which holds the balance of every item in every warehouse: staff count real quantities in an organised session, the system compares them with the balance, and creates the adjustment on approval.
People search for this under several names: stocktaking software, stock count software, inventory count software. They describe the same workflow. The difference between a spreadsheet and counting software is that the software knows the book balance at the moment of counting, calculates the difference in quantity and value, and posts the adjustment without re-entry.
Counting does not replace discipline in daily recording. When notes and invoices are entered on time, differences are small and explainable; when they are late, counting only exposes the size of the problem each time. A short training on receiving and issuing before the first count pays off.
How do you run a stock count in Anzma, step by step?
A count passes through five clear stages, and balances change only in the last one. That means you can start, pause and review without damaging stock.
- Balances do not change before approval in the fifth stage
- A session can be cancelled at any stage before approval
- Each session keeps its start date, balance snapshot and creator
- 1
Set up the session
Choose the warehouse, date and scope: all stock items, categories, or selected items. Turn on blind count to hide book quantities from counters.
- 2
Start counting
On start, the system snapshots the book quantity of every item in scope and records the position of the last stock movement at that moment.
- 3
Count and enter quantities
Scan barcodes to increase the count, type quantities, or import counts from Excel. Print a count sheet for the warehouse. Each counter records under their own name.
- 4
Review the differences
The count moves to review, showing expected, counted and difference in quantity and value per item. Reopen counting to fix an item.
- 5
Approve the adjustment
Approval posts one adjustment: surpluses come in and shortages go out, and the value posts to accounts. Uncounted items can be treated as zero or left alone.
How does counting work with barcodes and several staff?
The counting screen is a grid of all items in the session with a search box. In scan mode you read a barcode and the system finds the item and adds one, or asks for the quantity if you turn on the quantity prompt, which helps with cartons and packs. Every read is saved to the server immediately, so if the connection drops or the page closes the earlier counts are not lost.
More than one employee can count in the same session. Each records their own quantity under their name, and the system totals them per item while keeping each counter’s detail visible in review. That speeds up large warehouses and lets two people count the same item to confirm. If you counted on paper, import the quantities from an Excel file instead of retyping them.
Before going down to the warehouse, print the count sheet as a PDF for a paper reference, and when you finish, export the session with its results for filing or external review.
- Scan mode reads the barcode and increments the count
- Quantity prompt for cartons and packed items
- Each counter’s detail stays visible in review
- Import quantities from Excel if you counted on paper
Can you count stock without stopping sales?
Yes, because the difference is not calculated from the current balance but from the snapshot taken at the start. When counting begins, the system keeps the book quantity of each item, then shows next to it what moved since: sales, purchases and transfers. The expected quantity for the variance is the snapshot plus those movements.
If the balance was 20 at the start and you sold 3 before the counter reached the item, finding 17 means a difference of zero, not a shortage of 3. Finding 15 means a shortage of 2 after allowing for the sales. That is what makes counting during trading correct, and gives a shop that cannot close the chance to count without losing a sales day.
It is still best to limit movement on the items being counted at that moment; a counter working a shelf that is selling at the same time raises the chance of human error however sound the calculation.
| Item | Book | Counted | Difference | Value |
|---|---|---|---|---|
| Phone charger cable | 40 | 38 | -2 | -60 |
| Earphones | 15 | 15 | 0 | 0 |
| Protective case | 22 | 25 | +3 | +45 |
How are count differences adjusted in the books?
On approval the item balance is not overwritten; real movements are created in the stock ledger. A surplus comes in at the item’s average cost (or the last known cost if the average is zero), and a shortage goes out at average cost. One journal entry then posts: for a surplus, debit inventory and credit the inventory adjustment account; for a shortage, the reverse.
So the warehouse balance equals the books after the count, and the shortage reaches profit through the adjustment account where you can see it on the income statement instead of being buried in the stock value. Every approved session stays on record with its variances and values, so you can compare one count with another and see which warehouses and items lose the most.
- Surplus comes in at average cost, not at selling price
- Shortage goes out at average cost and is booked as adjustment expense
- An approved session is locked and cannot be edited
- A session can be cancelled before approval with no effect on balances
How often should you count stock?
A periodic count covers the whole warehouse on a fixed date, yearly or twice a year, often tied to closing the books. A cycle count covers part of the warehouse every week or month, such as one category or fast-moving items, so the whole warehouse is covered across the year without closing.
The system supports both through the session scope: all items for a full count, or selected categories or items for a partial one. High-value and fast-moving items suit frequent counts, slow ones once or twice a year. The slow-moving report in the warehouses module helps you decide what deserves repeated counting.
What are common counting mistakes and how do you avoid them?
Most counting errors come from the procedure, not the counting. The first is counting an item in two places, avoided by dividing the warehouse into zones and assigning them. The second is mixing units, such as counting cartons as pieces, avoided by fixing the counting unit on the sheet and training counters before starting.
The third is approving before reviewing large differences. An item with a big value difference deserves a recount before it becomes an entry; in review you reopen counting, fix the item and return. The fourth is ignoring what was not counted: uncounted items show no difference unless you choose to treat them as zero, a decision to take only after confirming the whole warehouse was counted.
Finally, do not neglect the cause. A count reveals a difference but does not explain it, so record what you discover in the session notes, then fix the root: a receiving gap, a sale without an invoice, or damage not recorded with an issue note.
How does stocktaking connect to notes, batches and accounting?
Counting reads the balances of warehouses and writes its adjustment to the ledger that stock movement notes write to, so surpluses and shortages appear on the item card with every other movement. Items come from product catalog software, and the effect appears in accounting software.
For items with batches and expiry dates, counting works alongside batch and expiry tracking so traceability stays correct after the adjustment. See the plans for warehouse limits per plan.
What do you prepare before count day? A checklist
A count is won or lost before counting starts. This short list cuts false differences and works for a partial session as well as a full count.
- Post every pending note and invoice before starting the session
- Tidy the store and keep damaged and returned goods in a separate place
- Assign zones to counters so no item is counted twice
- Print the count sheet and fix the counting unit (piece or carton)
- Prepare scanning devices and make sure every item has a barcode
- Decide who reviews the differences and who may approve
Example: counting a branch from start to entry
An illustrative example with assumed figures for an accessories branch. A partial session starts for the accessories category and the system takes a snapshot of balances. After review, three differences appear: 2 short on a cable costing 30 (60), 3 over on a case costing 15 (45), and 1 short on a charger costing 120 (120). The net difference is a shortage of 135.
On approval the two shortages leave and the surplus enters at average cost, and one entry is posted: debit stock adjustments for the net shortage of 135 and credit inventory. The income statement shows an adjustment expense of that amount, and the manager asks: where did the charger go? That question is the real value of a count; the entry is only its record.
| Item | Difference | Unit cost | Value effect |
|---|---|---|---|
| Cable | -2 | 30 | -60 |
| Protective case | +3 | 15 | +45 |
| Charger | -1 | 120 | -120 |
| Net | -135 |
Who approves a count and how do you control the review?
Counts have their own permissions: view, create, edit, delete, approve and export. So you can have the storekeeper count, the manager review, and only the permission holder approve, so whoever counted does not approve their own difference. A session keeps who created it, its date and its snapshot of balances, so an internal or external auditor can go back to any earlier count and see how the team reached its numbers.
In review, focus on differences that are large in value rather than in units: an expensive item short by one deserves a recount before it becomes an entry. Reopen the count to correct rather than approving and then fixing with a reversing movement, since correcting before approval is cleaner. After approval, keep a note explaining the causes of the biggest differences, so at the next count you can tell whether the problem recurred or was fixed.
Who is stock count software for?
It suits any business that holds stock and wants to know its differences. Counting is enabled in templates such as retail store management software, wholesale management software, tender and supply management software, factory management software, restaurant management software and pharma company management software.
Shops use it to find where daily shrinkage goes, distributors to audit branch warehouses, and restaurants to count ingredients. It runs in the browser on a computer, tablet or phone; there is no native mobile app at present. Book an online meeting and we will run a count session on your own business.
Frequently asked questions
How do I count my shop step by step?
Create a count session for the warehouse and choose its scope, then start counting so the system snapshots balances. Scan barcodes or enter quantities, review the differences in quantity and value, and approve the adjustment so stock and accounts update together.
What is the difference between periodic and cycle counting?
A periodic count covers the whole warehouse on a fixed date such as year end. A cycle count covers parts of it across the year, such as one category per month. Both are supported by choosing the session scope: all items, categories, or selected items.
Can I count one warehouse or one item only?
Yes. Each session belongs to one warehouse, and its scope can be all stock items, certain categories, or selected items. You can count a fast-moving item weekly or one category monthly without touching the rest of the warehouse.
What happens to shortages and surpluses in the books?
On approval, surpluses come into stock and shortages go out at average cost, and one entry posts against the inventory adjustment account. Warehouse stock then matches the books, and the effect reaches profit instead of disappearing inside stock value.
Can I count without stopping sales?
Yes. The system snapshots balances when counting starts and calculates the difference from the snapshot plus movements since, so sales during counting do not appear as shortages. It is still best to limit movement on the items being counted at that moment.
Does counting support barcodes and phones?
There is a barcode scan mode that records the item and increments the count with each read, working in the browser on a computer, tablet or phone. Reading needs a barcode reader that types like a keyboard; the phone camera is not used for scanning. There is no native mobile app at present. You can also type quantities or import them from Excel.
How often should stock be counted?
It depends on how fast stock moves and what it is worth. High-value or fast-moving items weekly or monthly, slow ones once or twice a year, and a full count usually when you close the books. Regularity matters most, so differences do not accumulate.
Is there a free stocktaking program?
We do not offer a free program. Anzma is a subscription service with plans, and you can book a free online introductory meeting where we run a count session on data from your own business. Plans differ in warehouses and users, shown on the pricing page.
What is the difference between book quantity and actual quantity?
Book quantity is the balance recorded in the system from notes and invoices; actual quantity is what staff counted on the shelf. The gap is a shortage or surplus. The system snapshots the book quantity when the session starts and compares it with the count after allowing for movements during counting.
Can I recount an item before approving?
Yes. You can reopen counting from the review stage to correct one or more items and return to review. Neither balances nor accounts change before approval, and the whole session can be cancelled at any stage before it with no effect.
Part of the product line
inventory management software
From item to warehouse to stock count: items and units, multiple warehouses, notes, counts and expiry tracking, linked to your sales, purchasing and accounts.
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


