On this page
What is payroll software?
It turns contract, attendance and advance data into a monthly payroll, payslips and an accounting entry, instead of a spreadsheet rebuilt every month. People search for it as a payroll system, salary calculation software or payroll sheet; they all describe one cycle.
In Anzma it is a module inside the HR system. It reads salary and allowances from the employment contract, takes lateness, absence and overtime from attendance, posts the result to accounting and pays from treasury and banks. No files travel between separate tools.
It does not interpret the law for you. It applies the rules configured in it, and the official authority stays the reference. This page explains what the software actually does and what remains your decision.
- Automatic monthly run from contract, attendance and advances
- A PDF payslip for every employee
- A balanced ledger entry by cost centre
- Advances, instalments and a final settlement on exit
How are salary components and structures defined?
Pay is built from components: each is an earning, a deduction or an employer contribution. Each has a calculation method: a fixed amount from the contract, a percentage of basic or gross, or a small formula over named variables evaluated by a safe expression engine.
Flags control treatment: taxable or not, part of the insurance base or not, shown on the payslip, and which ledger account it posts to. Components are grouped into a salary structure, assigned to the contract, and adjusted per employee when needed.
A ready standard structure ships with basic, housing, transport and another allowance from the contract fields, plus the statutory components for the country. You add a meal allowance, commission or any deduction in minutes.
| Type | Effect | Example |
|---|---|---|
| Earning | Raises gross pay | Basic, housing, transport, commission |
| Deduction | Reduces net pay | Employee insurance, advance, penalty |
| Employer contribution | A cost to you, not deducted from net | Company share of insurance |
| Variable | Entered in the run each month | Bonus, one-off deduction |
How is a payroll run built and net pay calculated?
Net pay is earnings minus deductions: basic, allowances and overtime, less lateness, absence, the advance instalment and statutory deductions. Every computed line is stored with its base, rate and source, so a payslip can be re-read and audited months later.
A purely illustrative example for one employee, with made-up figures: basic 8,000, housing 2,000, transport 500, so fixed gross is 10,500. Add approved overtime 600, subtract lateness 150 and an advance instalment 700, then the statutory deductions set by the company’s country rules. Net = 10,500 + 600 − 150 − 700 − statutory deductions.
Calculation handles joiners, leavers and mid-month salary changes by prorating on the day basis you choose: 30 days, calendar days or working days. If an earlier month is corrected, the difference appears as a reviewable arrears line.
| Item | Type | Amount |
|---|---|---|
| Basic | Earning | 8000 |
| Housing and transport | Earning | 2500 |
| Approved overtime | Earning | 600 |
| Lateness deduction | Deduction | 150 |
| Advance instalment | Deduction | 700 |
| Statutory deductions | Deduction | Per country rules |
Does payroll take overtime and lateness from attendance automatically?
Yes. The run reads each employee’s monthly attendance summary: absence days, lateness deductions and approved overtime only. Unpaid or part-paid days come from approved leave, so nothing is typed by hand.
By default the system requires attendance to be locked before a run is approved, so a punch cannot change after pay is released. Unresolved exceptions, a missing contract or a missing bank account show up as warnings on the review screen instead of passing silently.
A draft run can be recalculated as often as you like. Once approved and posted it is locked; corrections are adjustment lines in the next run, or a reversal of the run.
- 1
Lock attendance
The attendance owner closes the monthly summary after resolving exceptions and approving overtime.
- 2
Create the run
Pick the month and scope: company, branch, department or selected employees.
- 3
Calculate and review
The system calculates and shows employees against components with warnings and variance from last month.
- 4
Approve and post
An authorised user approves the run and posts it to accounting as one entry.
- 5
Pay and send payslips
Net pay is settled from treasury and payslips go out to employees.
How does payroll differ between Egypt and Saudi Arabia?
The statutory base differs: Egypt has social insurance and salary income tax, while Saudi Arabia has GOSI social insurance by nationality and no income tax on wages. Anzma has one engine per country that reads its rates from dated tables, so they update without code changes.
We describe the structure of the rules here, not their numbers. Every seeded value carries a review marker pointing to the official source and shows on the “Statutory rules” screen, so you confirm it is current before your first live run. We deliberately print no rates on this page so it does not go stale.
The engine matching the company’s country is enabled; for other countries the run works with no statutory lines except those you add. For the official detail see Egypt’s National Organization for Social Insurance and Saudi Arabia’s Ministry of Human Resources and Social Development.
| Input | Egypt | Saudi Arabia | In Anzma |
|---|---|---|---|
| Social insurance | Insurance with a wage floor and cap | GOSI and SANED by nationality | Configurable, verify with the authority |
| Income tax | Progressive tax on salaries | No wage income tax | Engine for Egypt only |
| Martyrs fund | A small deduction | Not applicable | Configurable, verify |
| End of service | Covered by insurance; company gratuity optional | Award under labour law | Configurable, verify |
| Bank file | Bulk transfer file | SIF wage file | Check format with the bank |
How are advances and loans issued and recovered in instalments?
An advance starts from an approved employee request in employee requests or is entered by HR, with an amount, number of instalments and start month. It is paid out from treasury, recorded as a receivable from the employee, and each instalment is deducted automatically in every run.
An instalment can be skipped or rescheduled with approval, or the advance settled early. The system shows a statement per advance, each employee’s remaining balance, and a report of outstanding advances. On exit, any remaining advance is deducted from the final settlement.
Penalties and one-off bonuses go in as variable inputs on the run, typed in or imported from a spreadsheet, and show as separate payslip lines.
- An advance with instalments and a start month
- Automatic deduction in each run
- Skip or reschedule with approval
- Early settlement and a balance per employee
How are end-of-service awards and final settlements calculated?
A settlement starts on the “End of service” screen with a reason, last working day and notice. The system builds a separate run holding salary to the last day, leave encashment per policy, the end-of-service award, remaining advances and other dues.
For Saudi Arabia the module calculates the award under the labour-law rules configured in it, including the entitlement bands by exit reason and length of service. In Egypt the end is covered by insurance, so a company gratuity is an optional policy whose formula you set. Review everything with the official source before approval.
You can also accrue a monthly provision, so the expense and liability build gradually instead of appearing at exit. A clearance checklist covers custody, finance and handover, and the user account can be deactivated on posting.
How are salaries paid and posted to accounting?
On posting, one balanced entry is created: debit salary expense and employer contributions by cost centre and branch, credit salaries payable per employee, statutory liabilities and recovered advances. Financial reports then reflect payroll as soon as it is approved.
Net pay is settled from a treasury or bank account with a payment voucher, in full or for selected employees, and each employee’s payment status updates until the run is paid. A payment can be cancelled, which returns those employees to unpaid.
Bank files come in three CSV formats: a generic one with configurable columns, an Egyptian bulk-transfer sheet, and a Saudi SIF-style wage file. A note reminds you to match the layout with your bank or wage platform first; we do not claim the file is approved by any authority. Cash-paid staff get a signed cash list.
What does the employee see of their pay?
An employee linked to a user account sees payslips under “My payslips” and downloads the PDF in Arabic, English or both. They see only their own, while pay data is visible to staff with payroll permission, and every view is recorded in the audit log.
Payslips can be emailed to everyone at once or downloaded as a ZIP, and you decide in settings whether employer contributions appear. An employee without a user account still appears in the run, because payroll does not depend on having an account.
Employees can also request a salary certificate or experience letter through employee requests; it is generated from an editable template after approval. That removes paper requests from month-end and leaves a clear trail for each one.
What kinds of runs exist and how is the cycle controlled?
There are three run types: a regular monthly run, an off-cycle run for bonuses and special payments, and a final settlement run for leavers. Each has a number, period and scope, so you can pay one branch or department without touching the rest.
Status moves through clear stages: draft, calculated, reviewed, approved, posted, paid and closed. Each stage has its own permission, so the person who prepares a run is not necessarily the one who approves, posts or pays it. Auditors usually expect that separation, and you set it through user roles.
If employees have contracts in different currencies, payslips are grouped by currency so payment and ledger never mix them. Prorating for joiners and leavers follows the day basis chosen once in settings.
| Type | When to use | Example |
|---|---|---|
| Monthly | The regular cycle for everyone | March payroll |
| Off-cycle | Bonus or exceptional payment | Seasonal sales bonus |
| Final settlement | An employee leaves | Dues of a resigning employee |
How do you review a run and catch mistakes before approval?
The review screen shows employees against components with totals, and you can open any number to see its source: the contract, attendance, an advance or a manual entry. No figure is left without an explanation you can defend.
The system compares each employee’s net with last month and warns when the change passes a threshold you set, so a mistyped amount or a forgotten component shows up before payment. It also warns about missing IBANs, negative net pay, missing contracts and unresolved attendance exceptions.
You can recalculate one employee after fixing their data without redoing the whole run. After approval nothing is edited in place: corrections are adjustment lines in the next run or a reversal entry, so every fix stays visible.
- Warning when net pay jumps against last month
- Alerts for missing IBAN and negative net
- Open the source of any calculated line
- Corrections by adjustment lines or reversal
Why use payroll software instead of Excel?
Excel works for a very small team, but it depends on one person who knows the formulas, and it breaks at the first mid-month joiner or salary change. The bigger problem is that it leaves no trail: who edited the cell, when, and why net pay changed since last month.
The software keeps pay, attendance and advances together, retains the history of every payslip, separates who calculates from who approves and pays, and posts the entry without re-keying. It saves hours at month end, but the real value is that the employee, the accountant and the manager all see the same numbers.
| Aspect | Excel | Anzma payroll |
|---|---|---|
| Attendance and overtime | Copied by hand from another file | Read from locked attendance |
| Advances and instalments | A column updated manually | Automatic schedule and balance |
| Ledger entry | Re-keyed in accounting | Balanced automatic posting |
| Change history | None | Line sources and an audit log |
| Employee payslip | A hand-formatted file | PDF, email and self-service |
| Separation of duties | No | Permissions to calculate, approve, post and pay |
How do you start with payroll, and how does it relate to plans?
The module is not tied to a plan feature; the general plan limits on users and branches apply. See pricing for details. It depends on employees, contracts, attendance, accounting and treasury.
You usually start by entering employees and contracts, then set components and the structure, then run a trial next to your current payroll to compare. This line is part of an integrated HR system and of a complete business management system that links it to sales and stock. The ERP selection guide helps you decide what you need.
To see a payroll run on your own data, book a free online meeting. We will set components, your country’s rules and the payment method with you.
Frequently asked questions
How is net pay calculated in Anzma?
The system adds earnings from basic, allowances and approved overtime, then subtracts lateness, absence, the advance instalment and statutory deductions. Each line is stored with its base and source, so you can open a payslip later and trace any number. Statutory deductions follow the company’s country rules, confirmed with the official authority.
Does payroll take overtime and lateness from attendance automatically?
Yes. The run reads the monthly attendance summary: absence days, lateness deductions and approved overtime only. By default it requires attendance to be locked before approval so data cannot change after payment, and it warns about unresolved exceptions. You can turn that requirement off in settings.
How are advances deducted in instalments?
You set the amount, number of instalments and start month. The advance is paid from treasury and each instalment is deducted automatically in every run until it ends. An instalment can be skipped or rescheduled with approval, or the advance settled early, and the employee’s balance and statement stay visible.
Does it support Egyptian insurance and tax rules?
Yes. It includes an Egyptian engine for social insurance, salary income tax and the martyrs fund, reading rates from tables you can update. Every seeded value carries a review marker pointing to the official source, so confirm the current figures before your first run. We do not publish fixed rates.
Does it support Saudi social insurance and wage files?
It calculates GOSI social insurance by nationality and produces a SIF-style wage file from the employer and bank settings. The layout must be matched with your bank or wage platform before use, and we do not claim any authority has approved the file. Check the official requirements with the authority.
How is the end-of-service award calculated?
It is calculated inside the employee’s final settlement from pay, length of service and exit reason, using the rules configured for the company’s country. In Egypt a company gratuity is an optional policy with a formula you set. You can accrue a monthly provision. Review with the official source and your accountant before approval.
Can the employee see their payslip?
Yes. An employee linked to a user account sees payslips under “My payslips” and downloads a PDF in Arabic, English or both. Payslips can also be emailed to everyone or downloaded in bulk. Employees see only their own, and every view of pay data is recorded in the audit log.
Is salary posted to accounting and cost centres?
Yes. A balanced entry debits salary expense by the employee’s cost centre and branch and credits salaries payable, statutory liabilities and recovered advances. Net pay is then settled from treasury with a payment voucher. This link requires the accounting and treasury modules to be enabled.
Is there free payroll software?
We do not offer free payroll software. The module is part of a paid platform sold in plans, which you can see on the pricing page. You can book a free online meeting where we show a payroll run on your own data and help you choose the right plan.
Do I need the attendance module to run payroll?
Payroll depends on employees, contracts, attendance, accounting and treasury as base modules. If you do not use biometric devices, you can enter absence and overtime as variable inputs, but connecting attendance removes manual entry and reduces errors.
Part of the product line
HR software
Five modules on one employee record: file, contract, punch, leave and pay, with the payroll entry flowing into accounting and cost centres automatically.
Official sources
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


