On this page
How are employment contracts managed in Anzma?
Each employee gets a contract with its number, type, start and end dates, probation, weekly hours and notice period, plus basic pay and allowances. The signed copy is attached, and the contract records that it is signed and the date.
In Anzma the module links to employee management, so the contract appears in the employee file tab, and it feeds payroll software with current basic pay and allowances. Leave reads the contract’s annual leave days if you set them.
This page is not legal advice. Contract requirements differ between Egypt and Saudi Arabia and between contract types; the company configures them to its policies and checks them with the labour office or its adviser.
- A contract with number, type, term and notice period
- Basic pay and allowances that feed payroll
- Expiry alerts and one-click renewal
- A signed contract attached and a PDF from a template
What is the lifecycle of an employment contract?
A contract starts as a draft and becomes active when activated. As its end approaches the system alerts you. It is then either renewed, so the old one becomes “renewed” and a linked new one is created; or left to become “expired” automatically after its end date by a daily job; or ended early with a reason and date, becoming “terminated”.
The system prevents two overlapping active contracts for one employee, so payroll clearly uses the active contract for the period. Earlier contracts stay saved in sequence, so you see an employee’s pay history across the years and every change.
The table below sums up the stages and what happens at each.
| Status | Meaning | Next step |
|---|---|---|
| Draft | A contract being prepared | Activate after review and signature |
| Active | A contract in force | Watch the end date |
| Renewed | Replaced by a newer contract | Kept for history and review |
| Expired | Term ended without renewal | Renew or end service |
| Terminated | Ended early with a recorded reason | Clearance and final settlement |
What is the difference between fixed-term and indefinite contracts?
An indefinite contract has no end date and runs until it is ended by procedure; a fixed-term contract has a start and an end. Anzma has four types: indefinite, fixed-term, part-time and internship. The type affects alerts, since the system does not warn about the end of a contract with no end.
The rules for each type, such as renewal limits or entitlements, are set by labour law in your country and they change. So the system does not impose any particular legal rule; it keeps what you enter and configure, and reminds you to review each renewal with the official authority or your adviser.
| Type | Has an end date? | Common use |
|---|---|---|
| Indefinite | No | Permanent staff |
| Fixed-term | Yes | A project or a season |
| Part-time | Per contract | Fewer weekly hours |
| Internship | Usually yes | Trainees and graduates |
How is an employment contract renewed?
The owner opens the expired or nearly expiring contract and chooses “renew”. It is copied with all its data and asks for new dates; pay and allowances can be edited, and you choose whether to activate the new contract at once. Nothing is rewritten from scratch.
On activation the old contract becomes “renewed” and stays linked to the new one in a chain, so you open any contract and see the whole renewal history. Payroll reads the new pay from the new start date, and part-months are prorated if pay changes mid-month.
- 1
Receive the alert
A notification arrives before the contract ends, by the number of days you set.
- 2
Review employee and pay
Management decides to renew and adjusts pay if needed.
- 3
Renew the contract
The contract is copied with new dates and activated.
- 4
Print and sign
A PDF is printed from the template, signed by both parties and attached.
What are the steps to end an employee’s service?
A contract is ended from its screen with a date and a note, becoming “terminated”. The full exit, covering last working day, notice, final settlement and clearance checklist, runs in payroll because it calculates dues, deducts advances and pays out leave balance.
The clearance covers custody, finance and handover, and the user account can be deactivated on posting. The end-of-service award is calculated there on the employee’s real data and the rules for the company’s country; the contracts module does not calculate it on its own.
Every step should be checked with the official authority or a labour adviser, because the rules differ by exit reason and length of service.
Can the contract be printed and the signed copy attached?
Yes. The contract prints as a PDF from an editable template in template management, with variables filled automatically: company, employee, pay and dates. You choose Arabic, English or both, and set the default in settings.
After signing, attach the scanned copy and mark the contract as signed with the date. The archive then lives electronically with the employee file and is easy to find in any review. Attachments are subject to a size limit in settings.
Each time a copy containing pay is opened, the system records it, because pay is sensitive data subject to audit.
How does a contract connect to payroll and leave?
The payroll run reads basic, housing, transport and the other allowance from the active contract, plus the assigned structure, and follows pay changes within a month by prorating days. You update pay in one place, the contract.
The contract also has an annual leave days field which overrides the general rule when it is higher, and leave reads it when computing entitlement. That suits contracts that grant better terms than the statutory minimum.
Viewing and exporting have separate permissions, so someone who sees contracts does not necessarily see the pay in them.
How is an employee’s pay history kept across contracts?
Each new or renewed contract carries its pay from its start date, so the chain of contracts is itself a pay history. Open the current contract and you see the earlier ones in sequence, how basic pay and allowances changed at each renewal, and who edited them and when.
Viewing pay from a contract, or printing it, is recorded in the audit log because pay is among the most sensitive employee data. That is why pay appears in a contract only to users with the “view salaries in contracts” permission, separate from viewing the contract itself. An owner can track dates and terms without seeing the figures.
An illustrative example: an employee started on a basic of 6,000, was renewed at 6,600 after a year and at 7,200 the year after. Three chained contracts appear, and each month payroll uses the pay in force on that date, so raises are neither lost nor repeated.
Does it track probation and notice periods?
Yes. The contract records the probation end, and on activation it copies the date to the employee file, so it shows in the employee management alerts before it arrives. You can confirm the employee or end the engagement before the date passes.
The contract stores the notice period in days and the weekly hours. Those values fill the printed letter automatically and are read when an exit begins in payroll. Minimum and maximum limits for these periods are set by your country’s labour law; the system keeps what you enter.
Permissions let you separate who creates a contract, who edits it, who deletes it and who exports it, which makes it easy to apply the principle that whoever signs a contract does not alone edit its pay.
Why use software instead of paper or Excel for contracts?
Contract end dates get lost in a paper archive until someone finds an employee working without a valid contract, and in Excel nobody warns you unless you open the file. The software alerts, marks expired contracts, keeps the renewal chain and ties the contract straight to pay.
The legal and management decisions stay yours, but the software makes sure no important date passes unnoticed and that the contract’s figures are the same ones payroll uses.
| Aspect | Paper or Excel | Contracts module |
|---|---|---|
| Expiry alert | None | A notification before the date |
| Contract status | Updated by hand | Becomes expired automatically |
| Renewal | Rewriting | Copy with new dates and pay |
| Pay history | Scattered | The chain of contracts |
| Link to payroll | Manual copying | Direct from the active contract |
| Printing | A hand-edited file | A PDF from a template with variables |
What does the cycle look like with seasonal contracts?
A contracting company hires project workers on fixed terms that end with the project. You create each worker’s contract with start and end dates and set the alert a month ahead. As the project nears its end you open the “active, ending soon” list and see which contracts need renewing for a new project and which end with the task.
For those you keep, you renew in one click with the next project’s dates and updated pay; for those whose term ends, the contract becomes “expired” and their dues are settled from payroll. The whole cycle runs without a side file, and the HR manager knows at any moment how many contracts are active and how many are near their end.
How do you get started with employment contracts?
Start with employees in employee management, then create current contracts with their dates and pay, attach signed copies and set the alert period. The module depends on employees and is not tied to a plan feature; the general plan limits apply, see pricing.
It helps most in factory management software, school management software and contracting company software, where fixed-term and seasonal contracts are common. It is part of a complete HR system.
To see the contract cycle on your own data, book a free online meeting.
Frequently asked questions
How do I track contracts that are about to expire?
The system notifies you before each contract ends by a number of days you set in HR settings, and nearly expiring contracts appear in the expiring-documents view and on the dashboard. A daily job also marks a contract past its end date as expired automatically.
What is the difference between fixed-term and indefinite contracts?
An indefinite contract has no end date, while a fixed-term one has a start and an end. The system supports both, plus part-time and internship contracts. Renewal limits and entitlements per type are set by labour law in your country, so check them with the official authority; the system keeps what you configure.
What are the steps to end an employee’s service?
You end the contract with a date and a note so it becomes terminated, then run the final settlement in payroll: last working day, notice, leave balance, remaining advances and a clearance checklist. Confirm the legal procedure with the official authority first, since rules differ by exit reason.
Are end-of-service dues calculated automatically?
The end-of-service award is calculated in the payroll module, inside the final settlement, on the employee’s real data and the rules configured for the company’s country, not in the contracts module. In Egypt a company gratuity is an optional policy. Review the result with your accountant.
Can I attach the signed contract?
Yes. You attach the scanned file to the contract and mark it as signed with the date. Attachments are subject to a size limit in settings and stay behind the contract permissions, so only authorised users can open them.
Do contracts differ between Egypt and Saudi Arabia?
Yes, requirements and rules differ between the two countries. Anzma does not impose one legal template; it provides an editable template the company configures and checks with the labour office or its adviser, and it handles tracking, renewal, printing and archiving.
Does a contract renew automatically?
No. Renewal is a management decision. The owner opens the contract and chooses renew, which copies it with new dates and pay for review before activation. The system keeps the chain of renewals but never renews a contract on its own.
Is there free employment contract software?
We do not offer free contract software. The module is part of a paid platform sold in plans, shown on the pricing page. You can book a free online meeting where we show the contract cycle on your own company data.
Part of the product line
HR software
Five modules on one employee record: file, contract, punch, leave and pay, with the payroll entry flowing into accounting and cost centres automatically.
Rate this page
Did you find this useful? Your rating helps others.
No ratings yet.


