Skip to content
Anzma modulePart of Operations

Short-term rental management software and system: units, availability, check-out and check-in

Register rentable units with hourly, daily and weekly rates, see availability on one timeline, record condition at check-out and check-in, then bill extras and settle the deposit.

Last updated: 6 min readBe the first to rate this page
Short-term rental management software and system: units, availability, check-out and check-in

In short

Anzma’s Rentals module manages units rented short term, flats, rooms, cars and equipment, with an availability calendar, check-out and check-in, maintenance and billing. It prices a rental from hourly, daily and weekly rates, adds charges for kilometres, late return, fuel and damage, and holds the deposit and settles it on return.

Who is it for?

  • Car rental
  • Equipment rental
  • Daily flats and rooms
  • Halls and coworking
  • Units and parking
Unit types
Flat, office, shop, room, vehicle, equipment, parking
Pricing
Hour, day, week, month, year, cheapest combination
Hand-over
Odometer, fuel, checklist, signature and photos
At check-in
Kilometre, late, fuel and damage charges
Deposit
Held as an advance, settled on return
Online booking
Not available; staff make the booking

What you get, at a glance

  • A complete rental cycle

    Reserve, check out, check in, close, with cancellation and no-show handling. Every step records who did it and when.

  • A timeline per unit

    See what is reserved, free, rented or in maintenance, and the system refuses to rent a unit over a period that is already taken.

  • Hourly or daily rentals

    Set hourly, daily, weekly, monthly and yearly rates per unit, and the system picks the cheapest combination that covers the period.

  • Inspection at both ends

    Odometer, fuel, hour meter, a checklist, damage notes, photos and the customer’s signature, with a printable contract and return receipt.

  • Deposit settled on return

    The deposit is held as an advance, deducted from the invoice, and any balance is refunded or kept as credit, as you choose.

  • Maintenance blocks a unit

    Record maintenance or a block for a period so the unit cannot be rented, and raise a work order from it if Work Orders is on.

Inside the product

Rental invoiceIllustrative invoice list, not real customer data.
On this page
Section 01

What is short-term rental management software?

It manages things you rent for hours, days or weeks: it knows which are free, records their condition on the way out and back, then calculates the rental and whatever is added to it. People search for “rental management software” and “daily apartment rental software”, and the term covers very different businesses: cars, equipment, chalets and halls.

In Anzma, Rentals puts these into one model called a “unit”, with a type, a location and rates. Every rental ends in an ordinary sales invoice in sales and invoicing software, so the books do not split. It is part of operations management software and is also the base of lease contract management software for long-term leases.

Section 02

Short-term rental or a lease contract?

The difference is duration and how you collect. A short-term rental is priced by the hour or day, collected on return, and inspected each time. A lease runs for months with a periodic instalment invoiced ahead of its due date. Units are shared between the two, so one unit can be rented both ways in different periods.

Short-term rental versus lease contract
AspectShort-term rentalLease contract
DurationHours to weeksMonths to years
PricingHour, day, week; cheapest mixMonthly, quarterly or yearly instalment
InvoiceOne, on returnOne per instalment, before it is due
InspectionAt every check-out and check-inNot needed at each instalment
DepositSettled on returnA liability held until the lease ends
ModuleRentalsLease contracts on top of Rentals
Section 03

How does the rental cycle work?

Each rental moves through clear states: reserved, checked out, returned, closed, or cancelled or no-show. The system will not accept a unit over a period that clashes with a rental or maintenance.

  1. 1

    Reserve

    Choose the customer, unit or units and the period. The system proposes the price, checks conflicts, and can ask for a deposit up front.

  2. 2

    Check out

    Record the unit’s condition as it leaves: odometer, fuel, hour meter, checklist, photos and the customer’s signature. A contract copy prints.

  3. 3

    Check in

    On return the condition is recorded again, and the system computes extra charges from the difference and the return time.

  4. 4

    Invoice and settle

    An invoice is created for the rental and charges, the deposit is deducted, and the rest is refunded or kept as credit.

Section 04

How is the price worked out by the hour, day or week?

You set optional rates per unit for the hour, day, week, month and year, and the system finds the cheapest mix that covers the period. If the weekly rate is below six daily rates, the weekly rate applies to six days. A grace period, 30 minutes by default, is deducted, the billable time never falls below a minimum, 60 minutes by default, and the remainder is rounded up to a whole unit or prorated, per your rounding setting.

Example: a unit at 60 per hour, 450 per day and 2,400 per week (illustrative numbers)
Rental periodHow it is pricedPrice
5 hours5 × the hourly rate300
8 hoursOne day is cheaper than 8 hours450
3 days3 × the daily rate1,350
6 daysThe weekly rate is cheaper than 6 days2,400
Section 05

Which charges are added at check-in?

The system computes extra charges from the check-in data and shows the total to staff before confirming, so they can discuss it with the customer. Any charge can be edited, added by hand or removed before the invoice. The rates are settings you control, not fixed numbers in the system.

  • Extra kilometres: distance above the daily allowance times the days, at the per-kilometre rate.
  • Late return: after a grace period, an hourly fee or a multiple of the daily rate.
  • Fuel shortfall: a rate per eighth of a tank below what the unit left with.
  • Damage and cleaning: an amount staff enter, and a default cleaning fee.
  • Any other charge with a free description added to the invoice.
Section 06

How do units, availability and maintenance work?

A unit has a code, name, type, location, rates, deposit, photos and fields for its type. A vehicle gets plate, chassis number, make, year, odometer and insurance expiry. A flat gets area, rooms, finishing and utility meters. Equipment gets a serial number, hour meter and next service date. Locations nest from property to building, floor and zone, and a location or unit can have an owner and a commission for those who manage other people’s property.

The availability screen shows every unit on a timeline, so you know in seconds what is free tomorrow. Maintenance blocks a unit for a period, is recorded with its cost, and can create a work order in work order software when that module is on. A unit’s status moves automatically between available, reserved, rented and maintenance.

Section 07

How are late returns tracked and performance measured?

An hourly job emails the customer a reminder a set number of hours before the return, alerts staff and emails the customer when a return is overdue, and marks reservations nobody collected as no-shows after a period you set. Messages go by email. WhatsApp is prefilled links staff open, and SMS needs a provider registered for you.

The reports are the rental register, revenue, fleet or unit utilisation, overdue returns, and damages and extras. They show which unit earns and which sits idle for days.

Section 08

What does a full rental look like in numbers?

Say a car is rented for three days at 450 a day, with an allowance of 200 km a day, an extra-kilometre rate of 2, and a deposit of 1,000. It returns two hours late and a quarter tank short. These numbers are illustrative; the rates come from your settings.

Example: a three-day rental invoice and deposit settlement (illustrative numbers)
ItemCalculationAmount
Rental3 days × 4501,350
Extra kilometres750 km driven, allowance 600, extra 150 × 2300
Late by two hoursAfter grace, at 40 an hour80
Fuel shortfallTwo eighths × 2550
Invoice totalBefore tax1,780
Deposit deductedFrom the invoice−1,000
Balance duePaid on return780
Section 09

How do tax and the deposit work in rentals?

The invoice follows the tax rate set on the unit, so a car and a residential flat can carry different rates, and a tax note can be added to the contract and printed. Tax treatment of rentals differs between Egypt and Saudi Arabia and by unit type and tenant, so confirm it with your accountant or tax authority rather than this page.

The deposit has its own path: it is received as a customer receipt and stays an advance, not revenue, then is deducted from the invoice when it is issued. It can be kept in full if a booking is cancelled or the customer does not show, or refunded, and all of it appears in the customer’s statement.

Section 10

Who is allowed to do what in a rental?

Not every employee needs everything. The module has separate permissions for check-out, check-in, invoicing, cancelling, managing units, maintenance, reports and settings, so reception can hand over a unit without changing its prices, and an accountant can see invoices without cancelling a rental.

Each rental keeps an event log, so you know who checked out, who checked in, and when a charge was added or removed. That is what you open in a dispute or at month-end review.

  • Check-out permission is separate from check-in and from invoicing.
  • Unit prices and charge settings are for those with the settings permission only.
  • Rental reports and exports have their own permissions.
Section 11

Who is short-term rental software for?

It fits anyone who rents assets by the period: car rental management software, equipment rental software, hotel management software for renting rooms by the night, coworking space management software for offices and parking, and property management software for units. It is enabled in those templates.

It has limits worth knowing. Bookings are made by staff, so there is no public reservation page for rentals, no link to flat-listing platforms, and it is not a full hotel system with housekeeping. If you want a customer to book a slot in advance, use appointment booking software. For monthly or yearly rent see lease contract management software.

To start, add your units with their rates and fields, set the kilometre, late and fuel policy, and run one rental through return, invoice and deposit settlement. See pricing for plan limits and the ERP selection guide to compare systems, or book a free online meeting and we set up rentals around your units.

Frequently asked questions

What is the difference between a short-term rental and a lease contract?

A short-term rental is priced by the hour or day, inspected at each check-out and check-in, and invoiced once on return. A lease runs for months with a periodic instalment invoiced before it is due. Both share the same units, so one unit can be rented either way in different periods.

How do I know which units are available?

The availability screen shows every unit on a timeline with its reservations, rentals and maintenance. The system refuses a unit over a busy period, and each unit’s status moves automatically between available, reserved, rented and maintenance, so you do not rely on staff memory.

How do I record a unit’s condition at hand-over and return?

At check-out staff record odometer, fuel, hour meter, a checklist, damage notes, photos and the customer’s signature, and repeat it at check-in. The system prints a contract and a return receipt as PDF, and computes extra charges from the difference between the two records.

Does it support hourly or daily rentals?

Yes. You set hourly, daily, weekly, monthly and yearly rates per unit and the system picks the cheapest combination that covers the period, after a grace period and a minimum you control. The leftover can be rounded up to a whole unit or prorated, per your policy.

How do I record unit maintenance?

Record maintenance or a block for a period with its reason and cost. It removes the unit from rental and shows on the availability timeline. If Work Orders is enabled you can raise a work order for the technician from it. When it ends the unit becomes available again.

Can customers book online?

No. Bookings in this module are made by staff, and there is no public reservation page for rentals. If you need customers to book a time slot in advance, use the Bookings module. Rentals handles check-out, check-in, deposits, extra charges and the invoice.

How is the deposit handled?

The deposit is recorded as a customer receipt that stays an advance, then deducted from the rental invoice on return. Any balance is refunded or kept as credit, and a deposit can be retained when a booking is cancelled or the customer does not show. Review the accounting treatment with your accountant.

Which businesses is it suitable for?

Renting cars, equipment, flats, rooms, halls, offices and parking. Templates for car rental, equipment rental, coworking, hotels and property management come with it enabled. Hotels use it to rent rooms; it does not replace a full hotel system.

Part of the product line

operations management software

What your company sells besides finished goods, from appointments to rented units, work orders and production, becomes an invoice and an entry automatically in one system.

All Operations modules

Rate this page

Did you find this useful? Your rating helps others.

No ratings yet.

Share this pageWhatsAppXLinkedInFacebook
Pricing

Clear plans that grow with you

Nearly every module in every plan; plans differ by limits.

Basic

For small businesses getting started

450EGP / mo

Billed 5,400 EGP yearly

Save 24%

Includes:

  • 3 users and one branch
  • 150 invoices per month
  • Every module your activity needs
  • 5GB storage
Book a meeting
Most popular

Advanced

For growing businesses with several branches and warehouses

790EGP / mo

Billed 9,480 EGP yearly

Save 20%

Everything in Basic, plus:

  • 7 users, 2 branches and 3 warehouses
  • 750 invoices per month
  • 2 POS devices
  • 15GB storage
Book a meeting

Comprehensive

Everything: unlimited invoices, manufacturing, custom domain and API

1,590EGP / mo

Billed 19,080 EGP yearly

Save 20%

Everything in Advanced, plus:

  • 15 users, 3 branches and 5 warehouses
  • Unlimited invoices
  • Manufacturing, custom domain and API
  • 30GB storage
Book a meeting

Enterprise

For enterprises: open limits, dedicated server and SLA

Custom

Everything in Comprehensive, plus:

  • Unlimited users, branches and warehouses
  • Dedicated server and SLA
  • Storage on demand
  • Account manager and tailored onboarding
Contact us